![](/images/new-backgrounds/1171054/17105461x1.webp)
Auto Source Settings
Automatically Searching The Input Signal
1 With the FLIP COVER of the remote con- trol open, press the MENU button to dis- play the Advanced menu, then use the cursor $ / % keys to select “SETUP”.
2 Use the cursor { / } keys to select “AUTO SOURCE”, then use the cursor $
/% keys to set ON or OFF.
ON: All input signals are searched.
OFF: Remote control VIDEO button: Video and
RGB and YCbCr signals are searched. Main unit SOURCE button:
All input signals are searched individually.
Using the Power Saving Function
When there is no signal input for a period of 5 min. or more, the power is automatically turned off and standby status is activated.
1 With the FLIP COVER of the remote con- trol open, press the MENU button to dis- play the Advanced menu, then use the cursor $ / % buttons to select “SETUP”.
2 When SETUP menu is displayed, use the cursor { / } keys to select “AUTO
POWER OFF”.
3 Use the cursor $ / % keys to set Power
Saving to ON or OFF.
ENGLISH
Selecting a Projection Type
If the projection type is not correctly set in accordance with the installation conditions, images may be projected reversed, verti- cally, or horizontally.
1 With the FLIP COVER of the remote con- trol open, press the MENU button to dis- play the Advanced menu, then use the cursor $ / % keys to select “SETUP”.
2 When SETUP menu is displayed, use the cursor { / } keys to select “PROJEC-
TION”, then press the ENTER button.
3 Use the cursor { / } keys to select a projection type in accordance with the set conditions.
The setting items will change as shown below each time a key is pressed.
Normal ⇔
⇔
Reversed vertically ⇔
To close the menu
Press the CANCEL button.
E – 29