S e t t i n g i n A c c o r d a n c e W i t h I m a g e C o n t e n t s ( c o n t i n u e d )
Setting Keystone
This is used to set the height for keystone adjustment.
1 With the FLIP COVER of the remote con- trol open, press the MENU button to dis- play the Advanced menu, then use the cursor $ / % keys to select “VIEW”.
2 Display the frame, then use the cursor { / } keys to select “KEYSTONE”.
3 Use the cursor $ / % keys to select “NORMAL” or “FULL”.
●Normal: normal keystone correction
●Full: In this mode, the image is enlarged to fill the screen vertically and then Keystone correc- tion is performed.
Setting the partial display position
Input a signal that is rated SXGA to RGB/YCbCr connec- tor and then set the partial display position with ASPECT (described later) set to Real.
1 With the FLIP COVER of the remote con- trol open, press the MENU button to dis- play the Advanced menu, then use the cursor $ / % keys to select “VIEW”.
2 Display the frame, use the cursor { / } keys to select “PAN” and then press the ENTER button.
3 Use the cursor { / }, $ / % keys to set the display position.
I n i t i a l S e t t i n g s
Audio Muting
Audio only can be muted for each input.
This function is convenient when multiple video units are connected to this projector.
1 Select the input to be muted (page 16).
2 With the FLIP COVER of the remote con- trol open, press the MENU button to dis- play the Advanced menu, then use the cursor $ / % keys to select “SETUP”.
3 Use the cursor { / } keys to select “SOUND MUTE”, then use the cursor $ /
%keys to set muting to ON or OFF.
Selecting the Background
Two different backgrounds can be selected for projection when there is no signal input.
1 With the FLIP COVER of the remote con- trol open, press the MENU button to dis- play the Advanced menu, then use the cursor $ / % keys to select “SETUP”.
2 Use the cursor { / } keys to select “BACKGROUND”.
3 Use the cursor $ / % keys to select one of the following backgrounds.
●Blue ● Black
Auto Gain
Brightness and contrast are adjusted automatically.
1 Select the input to be set for auto gain (page 16).
2 With the FLIP COVER of the remote con- trol open, press the MENU button to dis- play the Advanced menu, then use the cursor $ / % keys to select “SETUP”.
3 Use the cursor { / }key to select “AUTO GAIN”, then use the cursor $ / % keys to set ON or OFF.
To close the menu
Press the CANCEL button.
E – 28
