Toshiba RD-XV47KE To Select a Channel, When the setup for the position is completed, press Enter

E3B90ED_EN.book Page 29 Friday, February 23, 2007 12:38 PM

Channel Plan

CH Indication		TV Channel
02	– 12	E2 – E12
21	– 69	E21 – E69
74	– 78	X, Y, Z, Z+1, Z+2
80 – 99,100		S1 – S20,GAP
121	– 141	S21 – S41
142	– 153	R1 – R12

This unit can receive the Hyper and Oscar frequency bands.

7 Move to the Decoder Setting section using [Cursor P], and change the setting using [Cursor U / D].

•If you select “On”, Scrambled image will be decoded when connected to a decoder.

8 Move to the Skip Setting section using [Cursor P]. If the setting is “On”, change it to “Off” using [Cursor U / D].

•If you select “On”, the channel will be skipped when you change channels using

[PROG. / ].

9 When the setup for the position is completed, press [ENTER].

• To set another channel, repeat steps 5 to 9.

10 Press [SETUP] to exit.

•“Station” (station name) will be detected and assigned automatically. It cannot be selected.

To Select a Channel

Notes on using [the Number buttons]:

•Enter channel numbers as a two-digit number for the quickest result. For example, to select channel 6, press [0] and [6]. If you only press [6], channel 6 will be selected after 2 seconds. You can only select channels 1 to 99.

About an external input:

•You can select the external input mode “AV1”, “AV2” or “AV3” using [INPUT SELECT ] or

[PROG. / ].

•You cannot change the channel when either HDD, DVD or VCR is in any recording mode (normal recording, One-touch Timer Recording or Timer Recording).

Move		Introduction
You can replace two channels.
1 Press [SETUP] in stop mode.
Setup Menu will appear.
2 Select “Initial Setting” using		Connections
[Cursor U / D], then press [ENTER].
Setup Menu	01/01/07(Mon) 19:34
Disc Management
Editing
Dubbing
Timer Programme
Title List		Basic
Initial Setting
Digital Audio Setting
Playback
Recording		Setup
Display

3 Select “Channel Setting” using					Recording
[Cursor U / D], then press [ENTER].
	OSD	Language	01/01/07(Mon)	19:34
		Initial Setting
	Clock Setting
	Channel Setting
	TV Aspect
	Select Video
	Video Out
					Playback
4 Select “Move” using [Cursor U / D],
then press [ENTER].					Editing
		Initial Setting	01/01/07(Mon)	19:34
	OSD Language
	Clock Setting		Auto Tuning
	Channel Setting
			Manual Tuning
	TV Aspect
			Move
	Select Video
	Video Out				Function Setup
					VCR Functions
					Others

EN 29