Toshiba RD-XV47KE manual Recording, 98 EN, Noise Reduction Default Off

E3B90ED_EN.book Page 98 Friday, February 23, 2007 12:38 PM

Recording

1 Press [SETUP] in stop mode. Setup Menu will appear.

2 Select “Recording” using [Cursor U / D], then press [ENTER].

Setup Menu	01/01/07(Mon) 19:34
Disc Management
Editing
Dubbing
Timer Programme
Title List
Initial Setting
Digital Audio Setting
Playback
Recording
Display
3 Select a desired item using
[Cursor U / D], then press [ENTER].

	Recording	01/01/07(Mon) 19:34
Auto Chapter [HDD]
Noise Reduction
Bilingual Recording Audio
Fast Dubbing Audio (Video Mode)
External Input Audio
Recording Audio Select [XP]
Initialise

4 Refer to 1. to 3. on this page and set the selected item.

5 When you finish with the setting, press [SETUP] to exit.

1. Noise Reduction (Default: Off)

Set the noise reduction to reduce some noise in playback picture or to record in LP/EP/SLP mode.

(Follow steps 1 to 2 above.)

Select “Noise Reduction” using [Cursor U / D], then press [ENTER].

Option window will appear.

Select the desired setting using [Cursor U / D], then press [ENTER].

Strong

Weak

Off

The selected setting will be checked and activated.

2.Fast Dubbing Audio (Video Mode) (Default: Off)

On: When recording a bilingual programme to the HDD and to make the Fast Dubbing (HDD to DVD (Video Mode)) available, the unit only records either Main or Sub audio. (See page 40.)

Off: When recording a bilingual programme to the HDD, the unit will record both Main and Sub audio, however, this makes it impossible to perform the Fast Dubbing (HDD to DVD (Video Mode)).

(Follow steps 1 to 2 on the left.)

Select “Fast Dubbing Audio (Video Mode)” using [Cursor U / D], then press [ENTER].

Option window will appear.

Select the desired setting using [Cursor U / D], then press [ENTER].

On

Off

The selected setting will be checked and activated.

3. Initialise (Default: No)

Initialise the setting in Recording.

(Follow steps 1 to 2 on the left.)

Select “Initialise” using

[Cursor U / D], then press [ENTER].

Confirmation window will appear.

Select “Yes” using [Cursor L / P], then press [ENTER].

Initialise 01/01/07(Mon) 19:34

Initialising the recording settings. The Settings will be returned to their factory default.

OK to proceed?

YesNo

Your setting in Recording will be initialised.

98 EN