Toshiba RD-XV47KE manual 50 EN, HDD to DVD dubbing, Videotape to DVD dubbing

E3B90ED_EN.book Page 50 Friday, February 23, 2007 12:38 PM

Preparing to dub.

Please wait for a moment.

[HDD to DVD dubbing]

HDD DVD 10%

[Videotape to DVD dubbing]

Note

[HDD to DVD dubbing]

•You cannot switch the device mode except between HDD and VCR during HDD to DVD dubbing. No limitation for High Speed Dubbing.

[Videotape to DVD dubbing]

•When dubbing starts, the video image may be distorted because of the Digital Tracking function. This is not a malfunction. Play the videotape until the image clears up and then start the dubbing.

•Playback audio is determined by the setting you make in “Selecting the Sound Mode” section on page 102.

•Dubbing takes as much time as the playback does.

•You cannot switch the device mode except between HDD and DVD during videotape to DVD dubbing.

•If you want to watch the dubbed material, after the VCR to DVD dubbing, press [DVD] first then press [PLAY P].

2 The dubbing will stop automatically when it reaches the end of the title or videotape. If you want to stop the dubbing manually, follow the instructions below.

To stop the dubbing in progress:

1 Press [DUBBING] for 4 seconds. Confirmation window will appear.

2 Select “Yes” using [Cursor L / P], then press [ENTER].

3 Press [ENTER] to exit.

Cancelling the dubbing.

OK to proceed?

Yes No

50 EN