Toshiba RD-XV47KE manual Connecting to a TV, Connections Basic Setup

E3B90ED_EN.book Page 23 Friday, February 23, 2007 12:38 PM

Connections

Introduction

To Aerial jack

Audio/Video cable (not supplied)

3

3

	3	Scart/RCA cable
Scart cable (not supplied)			Scart adaptor
		(not supplied)
			(not supplied)

Antenna

Cable

Signal

or

2

RF cable (supplied)

Connections Basic Setup

/ DVD / VCR

(DECODER)

(TV)

Connections

Connecting to a TV

Connect the unit to a TV after considering the capabilities of your existing equipment.

Before installation, unplug your TV and this unit. Using the Scart socket

1 Connect the antenna or cable to the ANTENNA IN jack of this unit.

2 Connect the ANTENNA OUT jack of this unit to the Aerial jack of your TV. Use the supplied RF cable.

3 Connect AV1(TV) Scart socket of this unit to the Scart socket of your TV. Use a commercially available Scart cable.

Note

•If your TV does not have a Scart socket, use a commercially available Scart adaptor or Scart / RCA cable to connect.

•Connect this unit directly to the TV. If the AV cables are connected to a VCR, pictures may be distorted due to the copy protection system.

•When changing the “Video Out” setting (“SCART(RGB)”, “Component (Progressive)” or “Component (Interlace)”), connect to a Video jack or an S-Video jack on the TV. If the setting is changed, for example, to “Component (Progressive)” or “Component (Interlace)” while the scart cable is connected to the TV, a distorted video signal may be output.

HDD/DVD

AUDIO	S-VIDEO	COMPONENT
OUT OUT	OUT	VIDEO OUT

YANTENNA

	PB	IN	1
COAXIAL	L
	/CB

R		RF cable
/CR	OUT
PR
		(not supplied)

Selecting Progressive Scan (625p <525p> or Interlaced 625i <525i>) Playback

•If your TV is compatible with progressive scanning (625p <525p>), connect the TV to the COMPONENT VIDEO OUT jacks of the unit and set “Video Out” setting to “Component (Progressive)” in the setup menu (see page 92). Next, set your TV to the progressive scan mode.

•If your TV is not compatible with progressive scan, set “Video Out” setting to “Component (Interlace)”.

•Use a commercially available adaptor if the Video input jacks of your TVs or monitors are the BNC type.

Using the S-VIDEO OUT or the COMPONENT VIDEO OUT jacks and the AUDIO OUT jacks

If your TV has an S-Video or a Component Video input jack, use either an S-Video cable (to connect the S-VIDEO OUT jack) or a Component Video cable (to connect the COMPONENT VIDEO OUT jacks), and an Audio cable (to connect the AUDIO OUT jacks).

-S-Video connection provides the good quality picture.

-Component connection provides the better quality picture.

1 Follow steps 1 and 2 on the left.

2 Connect S-VIDEO OUT or COMPONENT VIDEO OUT jacks of this unit to the S-Video or Component Video input jacks of your TV. Use a commercially available S-Video cable or Component Video cable.

Recording Playback

Editing Function Setup VCR Functions Others

EN 23