Toshiba RD-XV47KE manual 28 EN, Select Manual Tuning using Cursor U / D, then press Enter

E3B90ED_EN.book Page 28 Friday, February 23, 2007 12:38 PM

3

Auto Tuning --/--/--(---) --:--

Auto Tuning Now

Wait for a moment.

•Wait for several minutes to finish channel storing.

After Auto Tuning has stopped:

• Use [PROG. / ] or [the Number Buttons] to 4 change the channel.

• When you use [the Number Buttons], press [0]

first for a single digit number.

• Use [INPUT SELECT ] or [PROG. / ] to

Select “Channel Setting” using [Cursor U / D], then press [ENTER].

Initial Setting 01/01/07(Mon) 19:34

OSD Language

Clock Setting

Channel Setting

TV Aspect

Select Video

Video Out

Select “Manual Tuning” using [Cursor U / D], then press [ENTER].

Initial Setting 01/01/07(Mon) 19:34

select an external input channel (“AV1”, “AV2” or

“AV3”) of this unit.

OSD Language

Clock Setting

Channel Setting

Auto Tuning

Manual Tuning

To cancel auto tuning:

Press [RETURN] during scanning.

Note

•The selection will be affected by how you receive TV channels in your local area.

•If the auto tuning is cancelled during scanning, some channels not yet tuned may not be received.

• You cannot change the channel when either HDD, 5

DVD or VCR is in any recording mode (normal recording, One-touch Timer Recording or Timer Recording).

Manual Tuning

You can tune each channel and set their properties manually.

1 Press [SETUP] in stop mode.

Setup Menu will appear.

2 Select “Initial Setting” using [Cursor U / D], then press [ENTER].

Setup Menu	01/01/07(Mon)	19:34
Disc Management		6
Editing
Dubbing
Timer Programme
Title List
Initial Setting
Digital Audio Setting
Playback
Recording
Display

TV AspectMove

Select Video

Video Out

Select the position number of which you want to change the setting using [Cursor U / D], then press [ENTER].

Manual Tuning				01/01/07(Mon) 19:34
	Pos.	Channel	Decoder	Skip	Station
	P01	21	On	Off	ARD
	P02	45	Off	Off	---
	P03	63	Off	Off	---
	P04	80	Off	Off	---
	P05	88	Off	Off	---
	P06	95	Off	Off	---
	P07	110	Off	Off	---
	P08	2	Off	On	---

•You can select position numbers 01 to 99.

•You can jump to the next or the previous page using [SKIP F] or [SKIP B].

Press [Cursor U / D] to start searching for the available channel.

•Search direction can be switched by pressing [Cursor U / D].

•If you already know the channel number, you can directly enter the channel number using [the Number buttons]. Refer to the following Channel Plan table and press the three digits to select the channel number.

(To select channel 4, press [0] first and then press [0] and [4]. Or press [4]. And when “4” appears, wait for 2 seconds.)

•If this is the channel you want, press [Cursor P].

28 EN