Toshiba RD-XV47KE manual Display Device Status Default On, Background Colour Default On

FL Dimmer

Display Device Status Background Colour Screen Saver

4 Refer to 1. to 4. on this page and set the selected item.

5 When you finish with the setting, press [SETUP] to exit.

1. FL Dimmer (Default: Auto)

Set the front panel display brightness.

You can choose one from “Auto,” “Bright” and “Dark”. If “Auto” is selected, the display gets dark when the power is off.

(Follow steps 1 to 2 above.)

Select “FL Dimmer” using

[Cursor U / D], then press [ENTER]. Option window will appear.

Select the desired setting using [Cursor U / D], then press [ENTER].

Auto

Bright

Dark

The selected setting will be checked and activated.

Display

01/01/07(Mon) 19:34

E3B90ED_EN.book Page 99 Friday, February 23, 2007 12:38 PM

Display

1 Press [SETUP] in stop mode. Setup Menu will appear.

2 Select “Display” using

[Cursor U / D], then press [ENTER].

Setup Menu	01/01/07(Mon) 19:34
Disc Management
Editing
Dubbing
Timer Programme
Title List
Initial Setting
Digital Audio Setting
Playback
Recording
Display
3 Select a desired item using
[Cursor U / D], then press [ENTER].

2. Display Device Status (Default: On)

Set the operating display.

(Follow steps 1 to 2 on the left.)

Select “Display Device Status” using [Cursor U / D], then press [ENTER].

Option window will appear.

Select the desired setting using [Cursor U / D], then press [ENTER].

On

Off

The selected setting will be checked and activated.

On: Shows the operating display.

Off: Does not show the operating display.

3. Background Colour (Default: On)

Set the background colour.

When there is no signal for the picture signal input, the screen changes to blue background.

(Follow steps 1 to 2 on the left.)

Select “Background Colour” using [Cursor U / D], then press [ENTER].

Option window will appear.

Select the desired setting using [Cursor U / D], then press [ENTER].

On

Off

The selected setting will be checked and activated.

4. Screen Saver (Default: On)

You can set to “On” to activate the Screen Saver after 15 minutes of no activity.

(Follow steps 1 to 2 on the left.)

Select “Screen Saver” using [Cursor U / D], then press [ENTER].

Option window will appear.

Select the desired setting using [Cursor U / D], then press [ENTER].

On

Off

The selected setting will be checked and activated.

EN 99

Introduction Connections Basic Setup Recording Playback

Editing Function Setup VCR Functions Others