Toshiba RD-XV47KE manual Digital Audio Setting, Down Sampling Default 48kHz, Mpeg Default PCM

E3B90ED_EN.book Page 93 Friday, February 23, 2007 12:38 PM

Digital Audio Setting

1 Press [SETUP] in stop mode. Setup Menu will appear.

2 Select “Digital Audio Setting” using [Cursor U / D], then press [ENTER].

Setup Menu	01/01/07(Mon) 19:34
Disc Management
Editing
Dubbing
Timer Programme
Title List
Initial Setting
Digital Audio Setting
Playback
Recording
Display
3 Select a desired item using
[Cursor U / D], then press [ENTER].

Digital Audio Setting 01/01/07(Mon) 19:34

Down Sampling

Dolby Digital

MPEG

DTS

Dynamic Range Control

4 Refer to 1. to 5. on pages 93 to 94 and set the selected item.

5 When you finish with the setting, press [SETUP] to exit.

1. Down Sampling (Default: 48kHz)

Set the Down Sampling.

(Follow steps 1 to 2 above.)

Select “Down Sampling” using [Cursor U / D], then press [ENTER].

Option window will appear.

Select the desired setting using [Cursor U / D], then press [ENTER].

48kHz

96kHz

The selected setting will be checked and activated.

48kHz: If your amplifier / decoder is NOT compatible with 96 kHz PCM, select “48kHz”. Sound recorded at 96 kHz is down sampled to

48 kHz.

96kHz: If your amplifier / decoder is compatible with 96 kHz PCM, select “96kHz”. Sound is sampled at 96 kHz.

Note	Introduction
When playing back disc with copyright protection:
• Even if you select “96kHz”, the sound will be down
sampled at 48 kHz.

2. Dolby Digital (Default: Bit Stream)

Set the Dolby Digital.	Connections
(Follow steps 1 to 2 on the left.)

Select “Dolby Digital” using
[Cursor U / D], then press [ENTER].
Option window will appear.
Select the desired setting using
[Cursor U / D], then press [ENTER].			Basic
		Bit Stream	Setup
		PCM
The selected setting will be checked and
activated.
Bit Stream: Outputs Dolby Digital signals.
			Recording
	If your amplifier / decoder is compatible
PCM:	with Dolby Digital, set to “Bit Stream”.
	Converts the Dolby Digital into PCM
	(2 channel).
	If your amplifier / decoder is NOT
	compatible with Dolby Digital, set to
	“PCM”.

Hint	Playback
When playing back the HDD or a DVD-RW disc
recorded in VR mode:
• If the audio source on a disc is in Dolby Digital
format, set “Dolby Digital” to “PCM” so that you can
switch to main audio (L), sub audio (R), or a
combination of both (L / R) using your amplifier /
decoder.

3. MPEG (Default: PCM)					Editing
Set the MPEG.
(Follow steps 1 to 2 on the left.)
Select “MPEG” using [Cursor U / D],					Function
then press [ENTER].
Option window will appear.
Select the desired setting using					Setup
[Cursor U / D], then press [ENTER].
		Bit Stream
					VCR
		PCM
The selected setting will be checked and					Functions
	If your amplifier / decoder is compatible
activated.
Bit Stream: Outputs MPEG Audio signals.
	with MPEG, set to “Bit Stream”.
PCM:	Converts MPEG into PCM.
	If your amplifier / decoder is NOT
	compatible with MPEG, set to “PCM”.				Others
			EN	93