Toshiba RD-XV47KE manual Dubbing from Videotape to HDD / DVD

E3B90ED_EN.book Page 55 Friday, February 23, 2007 12:38 PM

Dubbing from Videotape to HDD / DVD

You can copy the contents of a videotape to HDD or DVD disc.

Limitation:

•If a copy control signal is detected during dubbing, the dubbing will be stopped.

Limitations (VCR to HDD):

•With VCR to HDD dubbing, the unit recognise the HDD’s remaining time as the dubbing duration. The maximum possible duration is 10 hours and 30 minutes.

Limitations (VCR to DVD):

•You cannot dub to the finalised Video mode DVDs.

•You cannot dub to the protected VR mode DVDs.

•Copy-once programmes which are recorded directly from the TV can be dubbed to the HDD and CPRM compatible VR mode DVD-RW.

•Copy-once programmes which are copied from the HDD / DVD to a videotape cannot be dubbed further from the videotape to the HDD / DVD.

•With VCR to DVD dubbing, the unit recognise DVD’s remaining time as the dubbing duration although the actual dubbing will end when the videotape ends.

Preparing for dubbing:

• Insert a videotape to be dubbed.

Preparing for dubbing (VCR to HDD):

• Make sure there is enough space on the HDD.

Preparing for dubbing (VCR to DVD):

•Insert a recordable DVD. (See pages 34 to 37.)

•Make sure there is enough space on the DVD.

Press [VCR] first.

1 Press [PLAY P] to start playback of the videotape, and press [STOP S] when it reaches the point where you want to start dubbing.

2 Press [DUBBING].

The Dubbing Direction will appear.

3 For HDD dubbing:

Select “VCRHDD Dubbing” using [Cursor U / D], then press [ENTER]. For DVD dubbing:

Select “VCRDVD Dubbing” using [Cursor U / D], then press [ENTER].

Example: VCR ➞ HDD

Dubbing 01/01/07(Mon) 19:34

HDD➔DVD Dubbing

DVD➔HDD Dubbing

HDD➔VCR Dubbing

VCR➔HDD Dubbing

DVD➔VCR Dubbing

VCR➔DVD Dubbing

4 Select a desired Rec Mode using [Cursor L / P], then press [ENTER].

VCR ➔ HDD Dubbing						01/01/07(Mon) 19:53
			Please Select Rec Mode
	Fast	XP	SP	LP	EP	SLP Auto
	Space available					154335MB

Confirmation window will appear.

5 Select “Yes” using [Cursor L / P], then press [ENTER].

VCR ➔ HDD Dubbing					01/01/07(Mon) 19:53
			Please Select Rec Mode
			Start dubbing.
	Fast	XP	SPOK to LPproceed?EP		SLP Auto
			Yes	No
	Space available				154335MB

Dubbing will start.

When the dubbing is completed, completion message will be displayed on the screen for a few seconds.

To stop the dubbing in progress:

1 Press [DUBBING] for 4 seconds. Confirmation window will appear.

2 Select “Yes” using [Cursor L / P], then press

[ENTER].

3 Press [ENTER] to exit.

Note

• The device mode change is available only between

HDD and DVD during the videotape to the HDD /

DVD dubbing.

• After starting dubbing, the picture may be distorted

because of the digital tracking function. This is not a

malfunction. Be advised to play back the videotape

until the picture is stabilised, then set the starting

point at which you wish to start recording, and start

dubbing.

• Playback audio is determined by the setting you

make in the “Selecting the Sound Mode” section on

page 102.

EN 55

Introduction Connections Basic Setup Recording Playback

Editing Function Setup VCR Functions Others