Toshiba RD-XV47KE manual One Touch Dubbing from HDD or Videotape to DVD

E3B90ED_EN.book Page 49 Friday, February 23, 2007 12:38 PM

To stop One Touch Dubbing manually, follow the instructions below.

1 Press and hold [DUBBING] for 4 seconds.

2Select “Yes” using [Cursor L / P], then press [ENTER].

Completion message will appear and the dubbing will stop.

3Press [ENTER] to remove the message.

Note

•The Rec Mode will be set to “Auto” for the One Touch Dubbing.

One Touch Dubbing from HDD or

Videotape to DVD

With One Touch Dubbing, you can start dubbing right away with just one touch.

Before:

[General]

•Recordable DVD must be in the unit. (See pages 34 to 36.)

•There should be enough space on the recording DVD.

•Make sure to press the corresponding Device Select Button before using the device of your choice.

•Dubbing cannot be executed during recording of any device.

[Videotape to DVD dubbing]

• A videotape to be dubbed must be in the unit.

Limitations:

[General]

•You cannot dub to the finalised Video mode DVDs.

•You cannot dub to the protected VR mode DVDs.

•You cannot dub to the DVD if the number of the titles or the chapters of the disc is at its limit.

•Dubbing cannot be executed while the Setup Menu is showing.

[HDD to DVD dubbing]

•If a copy control signal is detected, the dubbing cannot be started.

•Dubbing cannot be executed during HDD or DVD recording.

[Videotape to DVD dubbing]

•If a copy control signal is detected during dubbing, the dubbing will be stopped.

•Copy-once programmes which are recorded directly from the TV can be dubbed to the HDD / DVD.

•Copy-once programmes which are copied from the HDD / DVD to a videotape cannot be dubbed further from the videotape to the HDD / DVD.

•Be noted that with videotape to DVD dubbing, the unit recognise DVD’s remaining time as the dubbing duration although the actual dubbing will end when the videotape ends.

1 There are three ways to start One Touch Dubbing.

Method 1 (Videotape to DVD):

Play the contents of videotape you want to dub. When it comes to the point where you want to start dubbing from, press [STOP S] or [PAUSE p]. Then, press [DUBBING VCR DVD] on the front panel. The dubbing will start from there to the end.

•If there is not enough space left on the disc, the prohibited icon “ ” will appear and the dubbing will not be started.

Method 2 (HDD to DVD):

Start the playback of the title you want to dub. Press [DUBBING] or [DUBBING HDD DVD] on the front panel. The dubbing will start from the beginning of the title to the end.

Method 3 (HDD to DVD):

If you press [DUBBING HDD DVD] on the front panel in stop mode without selecting any title, the unit will start dubbing the last title in the Original List or the Playlist. It will start dubbing the title in the Original List if the Original List was the last selected list. It will start dubbing the title in the Playlist if the Playlist was the last selected list.

•If the title was in the resume stop mode, the dubbing will start from the beginning to the end of the resume stopped title.

•If the title was in the regular stop mode, the dubbing will start from the beginning to the end of the last title.

•If there is not enough space left on the disc, the prohibited icon “ ” will appear and the dubbing will not be started.

Introduction Connections Basic Setup Recording Playback

Editing Function Setup VCR Functions Others

EN 49