Mitsubishi Electronics MC300 Parallel Port Connector, Serial Port Connectors, External Components

5 EXTERNAL COMPONENTS

Parallel Port Connector

Parallel Port Connector (LPT1) is used to connect to a printer.

Serial Port Connectors

The serial ports are 9-pin D-Sub male connectors. COM1 is a dedicated RS- 232 port. COM2 is a RS-232/RS-422/RS-485 selectable port.

One KEYBOARD Connector

A personal system/2 (PS/2)–style keyboard port

Expansion Card Slots

PCI Slot 1, PCI Slot 2, PCI Slot 3

The Workstation will support the addition of three 32-bit PCI (Periph- eral Component Interconnect) Cards if you want to upgrade your system.

CPU Board Slot 4

This slot is used by the CPU board. Tthere are 3 connectors on this board, they are:

One MOUSE Connector

A personal system/2 (PS/2)–compatible mouse port

10/100 ETHERNET

This is an RJ-45 connector. 10/100–megabit-per-second (Mbps) network interface controller (NIC) provides all the functions of a separate network card with Wakeup on LAN technology. The NIC supports both the 10BASE-T and 100BASE-TX Ethernet standards.

Video Connector

A 15-pin D-sub female connector for attaching an external monitor to the Panel Computer. SVGA for 12" Models and XGA for 15" Models.

PICMG or ISA Slot 5

This slot will support the addition of one PICMG (PCI Industrial Computer Manu- facturers Group) Card or one ISA Card.

ISA Slot 6, ISA Slot 7

The Workstation Computer will support the addition of two ISA (Industry-Stan- dard Architecture) Cards if you want to upgrade your system.

MAN-WKSTN-001 MC Series Computers 15