7 MAINTENANCE AND UPGRADES
| Adjust retainer foot | |
| until it is securely | |
Expansion card | against card |
|
| ||
Side View
Bracket | Foot inserted | |
through bracket slot | ||
|
Secure foot to bracket with screw
Rubber foot pad that rests snugly against edge of expansion card
Notches (2) that slide over metal tab on housing floor.
6.Reinstall card retainer bracket. Insert bottom of bracket onto the tab on the housing floor — there are notches at the bottom of the bracket that slide over the tab. Reinstall the screw to secure bracket to the top tab.
7.Adjust card retainer foot until it is securely against the edge of the card that you have just installed. Tighten the screw to ensure that the card will remain properly seated in the backplane connector.
8.Replace the rear panel and reconnect the power source.
18 | MC Series Computers |
|
