Viewing video images (continued)

C. Projecting images

Preparation:

Remove the lens cap.

Turn on the power of the connected video equipment.

FOCUS ring

ZOOM ring

COMPUTER button

POWER button

POWER button

COMPUTER1, 2 buttons

DVI-D (HDCP) button

S-VIDEO button

 

VIDEO button

VIDEO button

1.Confirm the POWER indicator lights up red.

If the projector was turned off before the lamp was cooled down sufficiently last time, the fan may start rotating and the POWER button may not work after the power cord is plugged. (The STATUS indicator blinks green.) After the fan stops rotating, press the POWER button to turn back on the POWER indicator.

2.Press the POWER button.

It may take about 1 minute for the lamp to light up.

The lamp fails to light up on rare occasions. In such a case, wait for a few minutes and then try again.

Do not cover the lens with the lens cap while the lamp is on. Do not strip off the aluminium sheet inside the lens cap.

After the POWER button is pressed, the image may flicker before the lamp becomes stable. This is not a prod- uct malfunction.

Regardless of the setting of LAMP MODE in the INSTALLATION menu, the STANDARD lamp mode is activated by default whenever the projector is turned on. When LAMP MODE has been set to LOW, the lamp mode changes from STANDARD to LOW about 1 minute after turn-on.

The projector starts warming up when the POWER button is pressed. During the warm-up process, images may appear dark and no commands are accepted.

By blinking red, the STATUS indicator indicates that the lamp should be replaced soon. Replace the lamp when the STATUS indicator blinks red. (See page 37.)

3.Select an input source.

Press the VIDEO button on the projector or the VIDEO or S-VIDEO button on the remote control that is corresponding to the terminal in use.

The input source is switched between VIDEO and S-VIDEO at every press of the VIDEO button on the projector.

The VIDEO and S-VIDEO buttons don’t function while the menu is being displayed.

Though it may take some time before an image is displayed on the screen depending on the type of the input signal, such symptom is not a malfunction.

Some images become easier to view when the setting of aspect ratio is changed. (See page 21.)

When projecting images from a DVD player that is connected to the COMPUTER/COMPONENT VIDEO DVI- D(HDCP) terminal, press the COMPUTER button on the projector to select DVI or press the DVI-D (HDCP) button on the remote control.

When projecting images from a DVD player that is connected to the COMPUTER/COMPONENT VIDEO IN-1/ IN-2 terminal, press the COMPUTER button on the projector or the COMPUTER 1 or COMPUTER 2 button on the remote control.

4.Adjust the position of the projector to keep an appropriate projection distance with which images are projected in their specified sizes.

5.Adjust the position of the projector so that the projector and the screen are perpendicular to each other. (See page 10.)

When the projector cannot be positioned perpendicularly to the screen, adjust the projection angle. (See page 10.)

6.Adjust the size of the projected image by turning the ZOOM ring.

7.Adjust the focus by turning the FOCUS ring.

Repeat steps 4 to 7, if necessary.

EN-19

Page 19
Image 19
Mitsubishi Electronics MH2850U user manual EN-19

MH2850, MH2850U specifications

The Mitsubishi Electronics MH2850U is a standout model in the projector market, designed to cater to both professional and educational environments. Its impressive set of features and advanced technologies make it a versatile tool for presentations, lectures, and even home entertainment. This projector is known for its high performance and reliability, making it a preferred choice among users.

One of the key features of the MH2850U is its native WUXGA resolution (1920 x 1200 pixels), which provides exceptional clarity and sharpness. This resolution is particularly beneficial for displaying detailed visuals, graphs, and charts, making it ideal for business presentations and educational purposes. The projector's brightness level, rated at 2,850 lumens, ensures that images remain vibrant even in well-lit environments. Users can expect sharp and vivid visuals, regardless of lighting conditions.

The MH2850U also employs advanced DLP (Digital Light Processing) technology, which enhances color accuracy and image quality. DLP projectors are known for their reliability and low maintenance needs, which adds to the MH2850U's appeal. Coupled with a high contrast ratio, the projector delivers deeper blacks and brighter whites, elevating the viewing experience significantly.

Connectivity options are another strong point of the MH2850U. It includes multiple HDMI ports, allowing users to connect various devices such as laptops, Blu-ray players, and streaming devices easily. Additionally, it features USB and VGA ports, providing flexibility for different multimedia applications.

The projector also supports a range of image adjustment features, including keystone correction and lens shift capabilities. These features ensure that users can effortlessly set up their presentations without the hassle of complicated adjustments. Furthermore, the auto power-off function contributes to energy efficiency, turning the projector off when it's not in use.

In terms of portability, the MH2850U is designed with user convenience in mind. Its lightweight and compact design make it easy to transport, making it an excellent choice for on-the-go professionals or educators who frequently travel between locations.

Overall, the Mitsubishi Electronics MH2850U stands out due to its combination of high resolution, brightness, connectivity, and versatility. Whether used in a classroom, conference room, or at home, this projector delivers excellent performance, making it a worthy investment for anyone in need of high-quality projection solutions.