Replacing the lamp

This projector is equipped with a lamp to project images. This lamp is a consumable. It may burn out or its brightness may decrease during use. In such cases, replace the lamp with a new one as soon as possible. Be sure to replace the lamp with a new lamp separately sold that is exclusive to this projector. Contact your dealer for purchase of the lamp.

Spare lamp VLT-XL650LP

Warning:

•Be careful not to drop the lamp fixing screws into the inside of the projector. Don’t put a metal piece or flammable object into the projector. Using the projector with any foreign object present inside may result in electric shock or fire. When you can’t remove the foreign object from the inside, contact your dealer for removal.

•Be sure to install the lamp securely. When the lamp isn’t installed properly, it won’t illuminate. Improper installation may also result in fire.

•Don’t shake the removed lamp or don’t lift it above your face. You may be injured in your eye by flying or falling glass fragments.

•Don’t replace the lamp immediately after use because the lamp cover is very hot. You may get burned. Turn off the power using the POWER button. After the lamp goes out, wait about 2 minutes until the intake and exhaust fans for cooling the lamp stop rotating. Then unplug the power cord, and wait at least 1 hour to allow the lamp to cool down enough to the touch.

•Do not touch the lamp directly. It may break and cause injury or burn.

Interval of lamp replacement

The recommended interval of lamp replacement is about 5000 hours*1*2 of consecutive use. Such interval differs depending on the operating environment and may be shorter than 5000 hours*1*2. Decrease in luminescence and/or color brightness indicates that the lamp needs to be replaced. When the lamp operation time exceeds 3750 hours*1, the indicator will blink alternately between green and red (while the lamp is lit; when the lamp is not lit, the indicator will be lit red only) and the lamp replacement message will appear on the screen for 1 minute everytime the lamp is turned on. When the lamp has been used for about 4750 hours*1, the replacement message (LAMP EXCHANGE)

will appear on the screen for 1 minute every 25 hours*1 thereafter. When the lamp operation time exceeds 5000 hours*1*2, the projector automatically shuts off and can’t be used until the lamp is replaced and the lamp

operation time is reset.

*1: Duration when LAMP MODE of the INSTALLATION menu is set to LOW. When it is set to STANDARD, this duration will be shorted.

*2: When LAMP MODE is set to STANDARD, this duration will be shorted to 2000 hours.

Caution:

•Don’t remove the lamp for any purpose other than replacement. Unnecessary removal of the lamp may result in a breakdown.

•This projector uses a high-pressure mercury lamp as the light source. The high-pressure mercury lamp may explode or fail to illuminate permanently because of an impact, scratch, or deterioration through use. The period of time until explosion or permanent failure to illuminate varies considerably from lamp to lamp, depending on operation conditions. Therefore, the lamp may explode soon after the start of use.

•The possibility of explosion of the lamp increases if you use it beyond its replacement period. When the instruction of lamp replacement appears, replace it with a new one immediately even if the lamp is still lighting normally.

•When the high-pressure mercury lamp explodes, glass fragments will scatter inside or outside the lamp box and the gas charged inside the lamp will diffuse inside or outside the projector. The gas inside the lamp contains mercury. Be careful not to breathe it or avoid it from entering your eye or mouth. If you should breathe it or if it should enter your eye or mouth, see a doctor immediately.

•In the event that the high-pressure mercury lamp exploded, glass fragments may have been scattered inside the projector. Ask your dealer to replace the lamp and to inspect the inside of the projector. When you clean or replace the lamp by yourself, be sure to hold the handle of the lamp. You may get injured by glass fragments.

•When removing the lamp from the ceiling-mounted projector, use the lamp replacement tray packed with the projector or option lamp to prevent glass fragments from scattering.

•Be sure to use the lamp exclusive to this projector, VLT-XL650LP. Use of other lamps may cause a failure of the projector.

EN-38

Page 37 Page 39
Page 38
Image 38
Mitsubishi Electronics MH2850U user manual Replacing the lamp, Interval of lamp replacement, Operation time is reset
Page 37 Page 39

MH2850, MH2850U specifications

The Mitsubishi Electronics MH2850U is a standout model in the projector market, designed to cater to both professional and educational environments. Its impressive set of features and advanced technologies make it a versatile tool for presentations, lectures, and even home entertainment. This projector is known for its high performance and reliability, making it a preferred choice among users.

One of the key features of the MH2850U is its native WUXGA resolution (1920 x 1200 pixels), which provides exceptional clarity and sharpness. This resolution is particularly beneficial for displaying detailed visuals, graphs, and charts, making it ideal for business presentations and educational purposes. The projector's brightness level, rated at 2,850 lumens, ensures that images remain vibrant even in well-lit environments. Users can expect sharp and vivid visuals, regardless of lighting conditions.

The MH2850U also employs advanced DLP (Digital Light Processing) technology, which enhances color accuracy and image quality. DLP projectors are known for their reliability and low maintenance needs, which adds to the MH2850U's appeal. Coupled with a high contrast ratio, the projector delivers deeper blacks and brighter whites, elevating the viewing experience significantly.

Connectivity options are another strong point of the MH2850U. It includes multiple HDMI ports, allowing users to connect various devices such as laptops, Blu-ray players, and streaming devices easily. Additionally, it features USB and VGA ports, providing flexibility for different multimedia applications.

The projector also supports a range of image adjustment features, including keystone correction and lens shift capabilities. These features ensure that users can effortlessly set up their presentations without the hassle of complicated adjustments. Furthermore, the auto power-off function contributes to energy efficiency, turning the projector off when it's not in use.

In terms of portability, the MH2850U is designed with user convenience in mind. Its lightweight and compact design make it easy to transport, making it an excellent choice for on-the-go professionals or educators who frequently travel between locations.

Overall, the Mitsubishi Electronics MH2850U stands out due to its combination of high resolution, brightness, connectivity, and versatility. Whether used in a classroom, conference room, or at home, this projector delivers excellent performance, making it a worthy investment for anyone in need of high-quality projection solutions.
Top Page Image Contents