MEMORY UPGRADES

Caution

If you are unfamiliar with the recommended anti-static precautions and/or the process of removing the system unit cover, refer to Appendix A, “The System Unit”.

3.Identify the cache memory socket see appendix B ‘System Motherboard’, in conjunction with the picture below.

4.To fit or remove a module in the cache socket, you may have to remove any expansion cards that are in the way. (Take note of which way all cables are connected.) Disconnect any cables connected to the cards, remove the screws that secure the cards at the rear of the system unit, then remove the cards from the system unit.

5.Remove the existing Cache memory SIMM module (if fitted) by carefully lifting by the edges. It is a tight fit.

6.Fit the new Cache memory SIMM module by aligning the module with the slot and carefully pressing home. It will only fit in one way. Remember, it is a fairly tight fit.

7.If necessary, replace any expansion cards you removed earlier and reconnect all cables etc.

4/6