T e c h n i c a l I n f o r m a t i o n

Delete User password

Use this to clear or remove the existing password, without replacing it with a new one. You may be asked for confirmation or to enter the old password.

Warning

Remember your passwords, But do not write them down on a piece of paper and leave it in your desk drawer, or pin it on your wall !

Password prompt

The system can be set to ‘ask’ for the password on switch on or re- boot. You may not wish to have a prompt for security reason, but the user is still required to enter a password.

Administrator Password

This allows the setting of a supervisory password and to choose whether a user can change their individual password. This administrator password will be requested in order to enter the BIOS SET-UP. If the user password is entered instead, there is only access to the System Summary and (if enabled) access to setting the User Password of System Security.

The procedure is generally the same as for the User Password, with the addition of User Password changeable by User. Select either Yes or No for this feature.

Start Options

Certain features can be set or enabled for system boot up.

Keyboard Numlock

If ON, the keyboard number lock is enabled when the system boots and the right hand section of the keyboard is numbers only.

The default setting is ON.

Keyboard speed

This sets the speed at which a pressed key will repeat.

The default setting is FAST.

C/7