T e c h n i c a l I n f o r m a t i o n
−and ↓ Scroll through a menu list.
←and→ To toggle values or settings.
↵The enter key, to select the highlighted item.
0/9 | Numbers, used in places where values are to be entered. |
+/_ | Used when required, similar to numbers. |
F9 | Restores the original settings that you entered with. |
F10 | To restore the original default setting |
Warning
F9 will not restore the date settings and pressing F10 may put in a default setting that could have been changed by our factory during production build.
We recommend that you make a note of ALL of the settings before any changes are made.
Set-up starts on its own
This can happen for three reasons.
∙There is a configuration error, or fault. In which case an error message may well appear. A list of these is given at the end of this chapter.
∙The BIOS battery may be running down. In this case you may also get error messages. If it happens every time you boot up, you may have to change the motherboard battery. Instructions for this are in the appendix B ‘System Motherboard’.
∙The system‘s configuration may have been changed. More system memory, more cache memory, or an upgrade that uses ISA interrupts etc.
If you are unable to resolve any problem, do not alter too many settings, but make a note of them and any error messages that appeared on the screen and call your Apricot dealer or authorised maintainer.