Mitsubishi Electronics PCFY-P36NKMU-E Auto Operation Automatic COOL/HEAT Change Over Operation

6-5. AUTO OPERATION [AUTOMATIC COOL/HEAT CHANGE OVER OPERATION]

		TIME SUN MON TUE WED THU FRI SAT
		TIMER	Hr ON
		AFTER	AFTER OFF
		ERROR CODE		FUNCTION
	ûFûC		ûFûC	FILTER
				WEEKLY
		ONLY1Hr.		SIMPLE
				AUTO OFF
	TEMP.			ON/OFF
	MENU	ON/OFF		FILTER
BACK	MONITOR/SET	DAY		CHECK TEST
PAR-21MAA	CLOCK		OPERATION	CLEAR

<How to operate>

Press POWER ON/OFF button.

Press the operation MODE button to display AUTO. Press the TEMP. button to set the desired temperature.

NOTE: The set temperature changes 2°F when the or button is

pressed one time. Automatic 67 to 83°F

Control modes		Control details	Remarks
1. Initial value of	HEAT mode for room temperature < Desired temperature
operation mode	COOL mode for room temperature Desired temperature
2. Mode change	(1) HEAT mode → COOL mode
	Room temperature	Desired temperature + 3°F. or 3 min. has passed
	(2) COOL mode → HEAT mode
	Room temperature	Desired temperature - 3°F. or 3 min. has passed
3. COOL mode	Same control as cool operation
4. HEAT mode	Same control as heat operation

6-6. WHEN UNIT IS STOPPED

Control modes		Control details	Remarks
1. Drain pump	1-1. Drain pump control
	The drain pump turns ON for the specified amount of time when any of the following
	conditions is met:
	ON for 3 minutes after the operation mode is switched from COOL or DRY to
	another operation mode (FAN).
	ON for 6 minutes after the float switch is submerged in the water when the
	float swich control judges the sensor is in the water.
	1-2. Float switch control		· Same control
			as COOL
	• Float switch control judges whether the sensor is in the air or in the water by
			operation
	turning the float switch ON/OFF.
	In the water : Detected that the float switch is ON for 15 seconds.
	In the air	: Detected that the float switch is OFF for 15 seconds.

19