P C L 5 1 0 0 B I O S S e t u p & P O S T

Reserving ISA legacy resources

To reserve interrupts and upper memory block (UMB) regions for ISA expansion cards, go to the Advanced menu, select PCI Configuration, then select PCI/PNP ISA IRQ Resource Exclusion or PCI/PNP ISA UMB Region Exclusion as required.

Multi-boot facility

Immediately after the first screen, a second screen displays various POST messages such as the memory test. While this screen is on display, a message at the bottom says:

Press <F2> to enter setup or <ESC> to enter Boot Menu

Even if this message is not displayed, you can press the <ESC> key and this menu will appear:

Boot Menu

1.Diskette Drive

2.Removable Devices

3.Hard Disk Drive

4.ATAPI CD-ROM Drive

5.Network Boot

<Enter Setup>

This menu can be used to temporarily use another drive or device to boot your system, for example a bootable CD-ROM, without having to enter the BIOS setup. Simply use the up and down arrows to make a selection. This change will not be permanent and the system boot will revert to the normal BIOS setting the next time you switch on your system.

4 PCL5100 USER GUIDE