P C L 5 1 0 0 f e a t u r e s a n d u p g r a d e s
3.Pushing gently on its top corners, press the DIMM into the socket and make sure the two end clips snap into place. Do not use excessive force. If the module will not fit easily, remove it and start again.
To remove a DIMM
1.Press the tabs on both of the socket’s end clips at the same time. This will release the DIMM and lift it partly out of the socket.
2.Pull the DIMM clear of the socket. Hold the DIMM by its ends and avoid touching the metal contacts.
3.Place the DIMM in suitable
When you have finished, replace any expansion cards you needed to remove, then refit the system unit panels.
If the computer does not automatically detect the new memory the first time you turn it on, start the BIOS Setup utility, go to the Advanced menu and change the Reset Configuration Data item to “Yes”, then restart the computer. If an error message appears, check that the DIMMs are of the correct type and are seated correctly in their sockets.
8 PCL5100 USER GUIDE