Mitsubishi Electronics PD-5065, PD-4265 manual Important Information, Precautions

Models: PD-4265 PD-5065

1 49
Download 49 pages 51.24 Kb
Page 4
Image 4

Important Information

Precautions

Please read this manual carefully before using your Mitsubishi plasma display and keep the manual handy for future reference.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any part inside of this unit.

This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included.

Therefore, it should be read carefully in order to avoid any problems.

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. ALSO DO NOT USE THIS UNIT’S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTACLE OR OTHER OUTLETS, UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE CABINET AS THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Warning

Not for use in a computer room as defined in the Standard for the Protection of Electronic Computer/ Data Processing Equipment ANSI/NFPA 75.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio / TV technician for help.

Warnings and Safety Precautions

The Mitsubishi plasma display is designed and manufactured to provide long, trouble-free service. No maintenance other than cleaning is required. Use a soft dry cloth to clean the panel. Never use solvents such as alcohol or thinner to clean the panel surface.

The plasma display panel consists of fine picture elements (cells). Although Mitsubishi plasma display’s utilize panels with more than 99.99 percent active cells, there may be some cells that do not produce light or remain lit.

For operating safety and to avoid damage to the unit, please read and observe the following instructions. To avoid shock and fire hazards:

1.Provide adequate space for ventilation to avoid internal heat build-up. Do not cover rear vents or install the unit in a closed cabinet or shelves.

The unit is equipped with cooling fans. If you install the unit in an enclosure, make sure there is adequate space at the top of the unit to allow hot air to rise and escape. If the display becomes too hot, the overheat protector will be activated and the display will be turned off. If this happens, turn off the power to the display and unplug the power cord. If the room where the monitor is installed is particularly hot, move the display to a cooler location, and wait for the display to cool for 60 minutes. If the problem persists, contact your Mitsubishi dealer for service.

2.Do not use the power cord polarized plug with extension cords or outlets unless the prongs can be completely inserted.

3.Do not expose the unit to water or moisture.

4.Avoid damage to the power cord, and do not attempt to modify the power cord.

5.Unplug the unit during electrical storms or if the unit will not be used over a long period.

6.Do not open the cabinet which has potentially dangerous high voltage components inside. If the unit is damaged in this way the warranty will be void. Moreover, there is a serious risk of electric shock.

7.Do not attempt to service or repair the unit. Mitsubishi is not liable for any bodily harm or damage caused if unqualified persons attempt service or open the back cover. Refer all service to authorized Mitsubishi Service Centers.

8.This equipment shall be connected to a MAIN outlet with a protective earth-ground connection.

9.The outlet shall be installed near the equipment and shall be easily accessible.

Page 4
Image 4
Mitsubishi Electronics PD-5065, PD-4265 manual Important Information, Precautions

PD-4265, PD-5065 specifications

The Mitsubishi Electronics PD-5065 and PD-4265 are plasma display screens that have garnered attention for their exceptional picture quality, robust design, and advanced technologies. These models are popular choices for both home theater setups and professional environments, combining aesthetics with functionality.

The PD-5065 features a 50-inch display, while the PD-4265 comes with a slightly smaller 42-inch screen. One of the standout characteristics of these models is their impressive resolution. The high-definition capability provides crisp and clear images, making them ideal for watching movies, playing video games, or viewing stunning graphics in a presentation scenario. Both models support a resolution of 1366 x 768 pixels, ensuring detailed visuals that maintain clarity even during fast-paced action scenes.

A defining technology in both models is Mitsubishi's proprietary Real Color Processing, which enhances the color fidelity of the displayed images. This system ensures that colors appear more vibrant and true-to-life, providing users with an enhanced viewing experience. Additionally, the plasma screens utilize anti-reflective coatings, which minimize glare and reflections, making them suitable for various lighting conditions.

The PD-5065 and PD-4265 also incorporate high brightness levels, allowing them to perform well even in brightly lit rooms. This brightness allows for an engaging viewing experience without compromising visibility. Furthermore, the contrast ratio of 4000:1 on these displays further enhances the depth and richness of colors, providing a more immersive experience.

Another notable feature of these displays is their connectivity options. Both models come equipped with multiple input options, including HDMI, VGA, and component video, enabling compatibility with a wide range of devices. This aspect makes it easy to connect gaming consoles, Blu-ray players, and set-top boxes, further enhancing their versatility for various applications.

Energy efficiency is another characteristic that Mitsubishi prioritized in these models. The use of advanced plasma technologies helps to reduce power consumption, which is an essential consideration for environmentally conscious consumers.

Overall, the Mitsubishi Electronics PD-5065 and PD-4265 plasma displays offer a compelling combination of performance, design, and technology. Their high-quality visuals, robust features, and versatile connectivity options make them an excellent choice for both entertainment and professional use. Whether in a home theater or a corporate setting, these models deliver a premium viewing experience.