On the remote control

KEYSTONE ST button

Press the KEYSTONE Sor KEYSTONETto adjust image distortion caused by tilting the projector.

Important:

Keystone adjustment is available for the keystone distortion in a slant angle of +15 degrees.

Keystone adjustment will not change the shape of the menus, the start-up screen, and the background (with no signal input).

HI BRIGHT button

Press this button to activate high brightness mode. To exit, press this button again.

COMPUTER button

Press this button to select VGA input signal source.

STILL button

Press this button to freeze the current image on the screen. Press again to resume playback.

VIDEO button

Press this button to select video signal sources (S-VIDEO or VIDEO).

BLANK button

The screen is temporarily cut off when this button is pressed. To cancel blanking, press this button again.

4:3/16:9 button

Toggle the 4:3/16:9 button to change the aspect ratio.

AUTO button

If source is a computer, press the AUTO button to adjust frequency and phase.

EN-22

Page 22
Image 22
Mitsubishi Electronics PK10 user manual On the remote control