4.Insert the plug from the AC adapter into the DC IN terminal.
5.Insert the appropriate end of the power cord into the AC adapter.
Warning:
Do not change the battery except this method. It may cause battery exploding.
Do not remove the battery from the projector when operating.
When remove the battery from the projector, power off the projector and unplug AC adaptor.
6.Insert the plug on the power cord into a wall outlet.
The CHARGE indicator lights red when charging is started and turns off when charging is completed.
We recommended that you full charge the battery all the time.
CHARGE (Red) | CONDITION |
On | Charging battery |
Off | Battery full |
When the projector is off, the charger works as a fast charging mode. It takes approximately 5 hours to complete charging.
When the projector is on, the charger works as a slow charging mode. It takes approximately 7 hours to complete charging.
EN-12
For battery removal
Slide the battery lock switches on the two sides to remove the battery from the projector.
Warning:
Please do not put battery into fire or heat, otherwise it may cause heating, fire, rupture or explosion. Please do not put battery away or transport it with necklace, hairpin, etc., otherwise it may cause heating, fire, leakage or explosion.
Neither the positive nor negative terminal of batteries can touch any metal, otherwise it may cause heating, fire, rupture or explosion.
Please do not poke battery with needle, hit, decompose or try to transform it, otherwise it may cause heating, fire, rupture or explosion.
Please do not use or put battery near fire or under
