Mitsubishi Electronics Pro 920

- 11 -

ENGLISH

OSD (On Screen Display)

FUNCTIONS

The monitor has an OSD(On Screen Display) function.

The following procedure shows how to adjust the screen

using the OSD function.

(1) Turn on the monitor.

(2) Press button to display the OSD

screen.

(3) Select the group icon on Main Menu by pressing .

(4) Select the item icon on Sub Menu by pressing

button.

(5)Adjust by pressing or button.

(6)To turn the OSD off, press when is

selected.

If you don't press any button for about 12 seconds,

the OSD will turn off automatically.

When pressing both and buttons simultaneously,

item selection moves to the reverse.

NOTE

4.1 How to adjust the screen

Main Menu

Sub Menu

Contents

Main Registration Limited Warranty CAUTION Trademark ENERGY STAR CONTENTS Page Flame retardants Cadmium Mercury CFCs (freons) Lead INTRODUCTION Never leave the monitor in contact with rubber or vinyl for an extended time period. Do not spray directly on the screen as cleaner may drip into the monitor and damage the circuitry. Keep your fingers away from the pivot area of the tilt/swivel base. REAR PART NAME FRONT INSTALLATION AND CONNECTION FUNCTIONS - 12 - Items Function A B C If a non-Factory Preset timing is used, "GEOMETRY RESET" does not work. 4.2 Adjustment Items X: Available Group Icon Icon Group Icon Icon TROUBLESHOOTING Page 6 6 SPECIFICATIONS * 7 2,4 1,2 3,4 1,2,3,4 1,2,6 <Optional Macintosh Adapter AD-A205 Setting Chart> Set the dip switch "ON" as shown below. Example; "1,2" )