Mitsubishi Electronics PUHY-HP-THMU-A Combination of outdoor unit, Specifications

3. Combination of outdoor unit

Component units of PUHY-HP144 to HP192 are listed below.

Outdoor unit model		Component unit models
PUHY-HP72THMU-A(-BS)	-		-
PUHY-HP96THMU-A(-BS)	-		-
PUHY-HP144TSHMU-A(-BS)	PUHY-HP72THMU-A(-BS)		PUHY-HP72THMU-A(-BS)
PUHY-HP192TSHMU-A(-BS)	PUHY-HP96THMU-A(-BS)		PUHY-HP96THMU-A(-BS)

* PUHY-HP144/192TSHMU-A(-BS) require “Twinning Kit” to connect component unit modules in the field.

4. Specifications

Model

PUHY-HP72THMU-A

PUHY-HP96THMU-A

PUHY-HP144TSHMU-A

PUHY-HP192TSHMU-A

Sound level (60Hz)

56dB <A>

57dB <A>

59dB <A>

60dB <A>

External static pressure

0 Pa*2

Indoor units

Total capacity

50 ~ 130%*1

Model

06 ~ 96

Quantity

1 ~ 13

1 ~ 16

1 ~ 22

1 ~ 24

Operation

Standard type

Cooling mode: – 5°CDB ~ 43°CDB [23°FDB ~ 109°FDB] (0°CDB ~ 43°CDB [32°FDB ~ 109°FDB] with outdoor unit at lower position)

Heating mode: – 25°CWB ~ 15.5°CWB [–13°FWB ~ 60°FWB]

temperature

GB

Outside air

Cooling mode: 21°CDB/15.5°CWB ~ 43°CDB/35°CWB (70°FDB/60°FWB ~ 109°FDB/95°FWB)

intake type

Heating mode: – 10°CDB ~ 20°CDB [14°FDB ~ 68°FDB]

*1: The total indoor capacity of units run simultaneously is 130% or less.

*2: To enable high static pressure, set the DipSW on the main panel as follows.

SW3-9: ON, SW3-10 60Pa compatible: OFF, 30Pa compatible: ON

5. Parts included list

1 Connecting pipe (flare)

2 Connecting pipe (flange)

3 Connecting pipe (flare)

4 Adapter

5 Packing

<Gas side>

<Gas side>

<Liquid side>

<Check joint>

(Inside ø23, Outside ø30)

Model

P72

1 pc.

–

1 pc.

2 pcs.

–

P96

–

1 pc.

1 pc.

2 pcs.

1 pc.

6. Space required for unit installation and operation

1In case of single installation

•Secure enough space around the unit as shown in the figure below.

[Fig. 6.0.1]

(1)If the distance is 300 mm [11-13/16 in] or more between the rear side and the wall

<A> Top view

(Unit: mm [in])

300*

[11-13/16]

A 450*

[17-23/32]

15* 15*

[19/32] [19/32]

(3)If the wall height (H) of the front, rear or side exceeds the wall height restriction

<B> Side view

(Unit: mm [in])

h
H	h
B		[19-11/16] H
	A
	500

(2)If the distance is 100 mm [3-15/16 in] or more between the rear side and the wall

<A> Top view

(Unit: mm [in])

100*

[3-15/16]

A 450*

[17-23/32]

50* 50*

[1-31/32] [1-31/32]

•When the height of the walls on the front, back or on the sides <H> exceeds the wall height limit as defined here, add the height that exceeds the height limit <h> to the figures that are marked with an asterisk (*).

<Wall height limit> Front: Up to the unit height

	Back: Up to 500mm [19-11/16 in] from the unit bottom
	Side: Up to the unit height
(4) If there are obstacles at the upper part of the unit
<C> When there is little space up to an obstruction
		(Unit: mm [in])
45°	1000
	[39-3/8]
240	D
[9-15/32]
	A	C

		50 [1-31/32]
A	Front	B Unit height
C	Back	D Air outlet guide (field-supplied)

4