Mitsubishi Electronics S290U user manual Bottom side, Remote control, About laser beam

Bottom side

1	1	Release buttons (Left/Right)
	2	Adjustment foot (Left/Right)
	3	Air inlet cover (bottom) /
		Filter cover (For bottom air inlet slots)
5	4	Lamp cover
2	5	Filter cover (For front air inlet slots)
	Caution:
	Do not replace the lamp right after using the projector.
3	The lamp is very hot.
4

Remote control				18	1	Power button
					2	COMPUTER button
				17	3	AUTO POSITION button
1			MUTE		4	MENU button
		VIDEO		16	5	RIGHT CLICK button (For mouse)
	COMPUTER		FOCUS
2			ZOOM/	15
	POSITION VOLME				6	EXPAND button
	AUTO
3				14	7	Wired remote control jack
					8	Picture in Picture (PinP) button
4				13
	MENU		LASER		9	STILL button
				12	10	Direction buttons
					11	ENTER button
5		RIGHT CLICK			12	Mouse pointer button
					13	LASER button
				11
					14	+ , – buttons
		ENTER		10	15	ZOOM/FOCUS button
6				9	16	VIDEO button
	EXPAND P in P		STILL		17	MUTE button
				8	18	Remote control transmitter
					19	Laser aperture
					20	Left click button (For mouse)

7

19

AVOID EXPOSURE -LASER	About laser beam
RADIATION IS EMITTED
FROM THIS APERTURE.	This remote control is class 2 (max. output 1 mW laser diode
	640 - 660 nm) laser equipment.
20	Beam Divergence : 6m distance about 10.0mm x 10.0mm (± 6.0mm)
	CAUTION
	LASER RADIATION
	DO NOT STARE INTO BEAM
	WAVE LENGTH : 640 - 660 nm
	MAX OUTPUT : 1 mW
	CLASS 2 LASER PRODUCT
	IEC 60825-1:1993+A1:1997
	CAUTION :

•Pressing the LASER button provided remote control emits laser beam. Do not look into the beam light directly. Do not point the laser beam at people. Looking the laser beam directly may damage eyesight.

•Use of controls or adjustments or procedures other than those specified herein may result in hazardous radiation exposure.

ENGLISH

EN – 7