Mitsubishi Electronics XD500U, SD510U, xd520u Setting range differs depending on the input signals

ITEM	ASCII	HEX				VALUE
WALL SCREEN	WS	57h	53h			0	(OFF), 1 (BEIGE), 2 (LIGHT BLUE), 3 (LIGHT GREEN),
						4	(PINK), 5 (BLACK BOARD), 6 (WHITE BOARD)
WALL SCREEN (BEIGE)	WSY	57h	53h	59h		1	- 5
WALL SCREEN (LIGHT BLUE)	WSB	57h	53h	42h		1	- 5
WALL SCREEN (LIGHT GREEN)	WSG	57h	53h	47h		1	- 5
WALL SCREEN (PINK)	WSP	57h	53h	50h		1	- 5
LAMP MODE	LM	4Ch	4Dh			0	(STANDARD), 1 (LOW)
AUTO POWERON	APON	41h	50h	4Fh	4Eh	0	(OFF), 1 (ON)
AUTO POWER OFF	APOF	41h	50h	4Fh	46h	00		(OFF), 05, 10, 15, 30, 60
SPLASH SCREEN	SS	53h	53h			0	(OFF), 1 (ON)
BACK COLOR	BB	42h	42h			0	(BLACK), 1 (BLUE), 2 (IMAGE)
AV MUTE MODE	MM	4Dh	4Dh			0	(BLACK), 1 (IMAGE)
IMAGE REVERSE	IR	49h	52h			0	(OFF), 1 (MIRROR), 2 (INVERT), 3 (MIRROR INVERT)
ASPECT	SC	53h	43h			0	(AUTO), 1 (16:9), 2 (FULL)
ASPECT(Position of 16:9 image)	SCP	53h	43h	50h		0	(CENTER), 1 (UPPER), 2 (LOWER)
PASSWORD FUNCTION	PSLOCK	50h	53h	4Ch	4Fh	0**** (UNLOCK), 1**** (DISPLAY INPUT),
		43h	4Bh			2**** (MENU ACCESS), 3**** (SPLASH ID SCREEN)
						**** is a 4 to 8-digit password comprised of any figures 1 to 4.
MENU POSITION	MP	4Dh	50h			0	(Upper left), 1 (Lower right)
CINEMA MODE	CINE	43h	49h	4Eh	45h	0	(OFF), 1 (AUTO)
VIDEO SIGNAL	VS	56h	53h			0	(AUTO), 1 (NTSC), 2 (PAL), 3 (SECAM),
(VIDEO only)						4	(4.43NTSC), 5 (PAL-M), 6 (PAL-N), 7 (PAL-60)
SET UP	STU	53h	54h	55h		0	(AUTO), 1 (OFF), 2 (3.75%), 3 (7.5%)
SCART INPUT	SRT	53h	52h	54h		0	(OFF), 1 (ON)
LANGUAGE	LG	4Dh	47h			0	(日本語), 1 (English), 2 (Español), 3 (Deutsch),
						4	(Français), 5 (Italiano), 6 (中文), 7 (한국어),
						8	(РУССКИЙ), 9 (Português)
RESET ALL	RSTALL	52h	53h 54h 41h 4Ch 4Ch
HORIZ.POSITION	HP	48h	50h			+ (increment), - (decrement)*1
VERT. POSITION	VP	56h	50h			+ (increment), - (decrement)*1
FINE SYNC.	FN	46h	4Eh			00		- 31
TRACKING	TRK	54h	52h	4Bh		+ (increment), - (decrement)*1
COMPUTER INPUT	CIN	43h	49h	4Eh		0	(RGB), 1 (YCBCR/YPBPR), 2 (AUTO)
OVER SCAN	VOS	56h	4Fh	53h		00		(90%) - 10 (100%)
HOLD	HLD	48h	4Ch	44h		0	(OFF), 1 (ON)
HOLD BEGIN	HLB	48h	4Ch	42h		00		- 99
HOLD END	HLE	48h	4Ch	45h		00		- 99
CLAMP POSITION	CLP	43h	4Ch	50h		001 - 255
CLAMP WIDTH	CLW	43h	4Ch	57h		01		- 63
VERT. SYNC	VSC	56h	53h	43h		0	(AUTO), 1 (OFF)
LPF	LPF	4Ch	50h	46h		0	(OFF), 1 (ON)
SHUTTER(U)	SHU	53h	48h	55h		00		- 20
SHUTTER(L)	SHL	53h	48h	4Ch		00		- 20
SHUTTER(LS)	SHLS	53h	48h	4Ch	53h	00		- 20
SHUTTER(RS)	SHRS	53h	48h	52h	53h	00		- 20

*1) Setting range differs depending on the input signals.

•Some commands are not executed depending on the input signal. The operational restrictions same as those on the menu setting are applied. Refer to “Menu operation” in the User Manual for more details.

How to set the value

Use the ASCII or HEX code as shown below to set the value.

ASCII

'+'

'–'

'0'

'1'

'2'

'3'

'4'

'5'

'6'

'7'

'8'

'9'

HEX

2Bh

2Dh

30h

31h

32h

33h

34h

35h

36h

37h

38h

39h

[Example 1] When setting the AUTO POWER ON to ON. (Figures and symbols enclosed in quotation marks are ASCII codes.):

Sending commands	Status code from	Description
from the PC, etc.	the projector
30 30 41 50 4F 4E 31 0D		Command for setting the
'0' '0' 'A' 'P' 'O' 'N' '1' ' '		AUTO POWER ON to ON
	30 30 41 50 4F 4E 31 0D	Command receipt confirmation
	'0' '0' 'A' 'P' 'O' 'N' '1' ' '	(Command echo back)

5