Mitsubishi Electronics TC-24A installation manual Function List contd

Function List (cont'd)

Function		Description
	Lock Buttons	Locks the following functions: ON/OFF, Mode (including
		SETBACK), Set Temperature, Fan Speed, and HOLD.
	Set Temperature Range	Limits the available temperature range for the local remote
Restrictions Settings	Limit	controllers (each group or all groups).
	Prohibit Remote	Locks the following buttons on the local remote controllers:
		ON/OFF, Mode, Set Temperature, and Filter Reset buttons
	Controller
		(collectively or by group)
		Selects the display formats for the following items: Display
	Display Format	language, temperature unit, room temperature, display or
		non-display of Cooling/Heating mode icons (during Auto mode),
		and backlight timer, and group names.
		• Selects the groups that the operation applies to when the
		Collective ON/OFF, HOLD, or SETBACK button on the
	Button Setting	controller is pressed. All groups are selected by default. The
		maximum and minimum temperatures can be set for the
		SETBACK operation.
		When the Group icon is touched, the action differs depending
Basic Settings		on the operation mode. Default is set to the operation mode 2.
		Operation mode1: Turns ON/OFF the units in the group
		whose Group icon is touched.
		Operation mode2: Displays the check mark when Group icon
	HOME screen	is touched.Touch the Group icons of the
		groups to be operated, and then touch the
	Operation Mode Setting
		"OPERATE" button to move to the Group
		screen. Multiple groups can be selected.
		Use this mode when operating the multiple
		groups collectively.
		Operation mode3: Directly moves to the Group screen of the
		group whose Group icon is touched.
	Volume Control	Sets the sound volume and screen brightness.
		If an error occurs on the TC-24A controller or the units and
		controllers it controls, the LED on the Collective ON/OFF button
	Error	will blink. If an error occurs on the indoor or LOSSNAY units,
		will appear on the corresponding group icon on the HOME
		screen. The error code can be verified and reset on the Status
Maintenance		List screen.
		Filter Icon will appear on the HOME screen when the filter is
	Filter sign	due for cleaning. The icon can be removed from the Status List
		screen.
	Touch Panel Cleaning Mode	Disables the touch panel to allow the user to clean the panel.
	Touch Panel Calibration	Calibrates the touch panel if the touch panel does not respond
	Mode	correctly when touched.
		Receives input signals from external devices and start/stop all
	External input	groups of units or permit/prohibit operations from the local
Miscellaneous		remote controllers. Requires cable connections.
		Outputs the operation status of the units (ON/OFF) or error
	External output	signals to external devices collectively, using contact signals.
		Requires cable connections.