①To configure a new pattern using a blank pattern
Touch a blank pattern number, then touch the | button to access the Edit Pattern screen. |
⇒ See Step 5. |
|
If one or more patterns have been configured and saved, the message "When copying other setting patterns to edit, select the pattern to be copied, and touch the OK button." will appear. Touch the [OK] button to create a new pattern using a blank pattern. To use an existing pattern as a template, select a desired pattern and then touch the [OK] button.
②To copy an existing pattern and paste it to selected days or dates
Touch a pattern number to select it, then touch the [OK] button to return to the Select Group and Day/ Date screen. To set the schedule for other groups or days/date ⇒ See Step 2.
When setting is complete ⇒ See Step 11.
③To edit an existing pattern
Touch an existing pattern number, then touch the | button to access the Edit Pattern screen. |
⇒ See Step 5. |
|
If the selected pattern number is assigned to other groups or days, the message "This pattern is used for another schedule. To use different pattern number, select the number, and touch the OK button.." will appear. To change the schedule of the day or date that was selected in Step 3 above alone, select a new blank pattern number and then touch the [OK] button. To change the setting of all groups and days to which the pattern is assigned, just touch the [OK] button.
5. On the Edit Pattern screen, touch an event number to edit its contents.
Event No.
Scheduled actions
Event No.
Scheduled actions
Scroll button
ON/OFF, Mode, Set Temperature, and Fan Speed | Air Flow Direction, Prohibit Remote Controller Operation |
*1 The scheduled actions for each event will be displayed over two pages. Use the scroll buttons to switch between the pages.
*2 On the Edit Pattern screen, the events of a specific pattern can be copied and pasted to another pattern.
Refer to page 32 for details
31