Mitsubishi Electronics TC-24A To select the groups on which to execute the HOLD function , To assign an operation mode to the Group icon on the [HOME] screen., To select the groups on which to execute the Collective ON/OFF function

47
To select the groups on which to execute the
HOLD function
1. Touch the ②Hold Button Setting button on the [Button Setting]
screen.
2. Read the pop-up message, and touch the OK button to confirm.
3. Select the groups to include from the Group buttons labeled ⑨.
By default, all groups are selected.
4. Touch the ⑩Save button.
⑩
⑨
Show Group Name List button
Shows a list of group names in a pop-up window.
1. Touch the ④Group Icon Setting button on the [Button Setting] screen.
2. Select among Operation mode 1, Operation mode 2, and Operation mode 3 by touching the corresponding
button labeled ⑬.
3. Touch the ⑭Save button.
⑭
⑬ Operation mode 1
Stops or starts the operation of the specific group of
units when the Group icon is touched.
Operation mode 2 (default)
Allows the user to select multiple groups before jumping
to the Group screen. Touch the operate button after
selecting groups to jump to the Group screen.
Operation mode 3
Jumps to the Group screen when a Group icon is
touched.
To select the groups on which to execute the
Collective ON/OFF function
1. Touch the ③Collecti ve Op eration Sett ing bu tton on th e
[Button Setting] screen.
2. Read the pop-up message, and touch the OK button to confirm.
3. Select the groups to include from the Group buttons labeled ⑪.
By default, all groups are selected.
4. Touch the ⑫Save button.
・The DIDO controller groups that do not support the Collective ON/OFF function cannot be selected.
⑫
⑪
Show Group Name List button
Shows a list of group names in a pop-up window.
Select All button
Selects all groups.
Select All button
Selects all groups.
To assign an operation mode to the Group icon on the [HOME] screen.