Mitsubishi Electronics WD-52525, WD-62725 manual Replacing the Lamp Cartridge

Appendix H: Lamp Cartridge Replacement, continued

Replacing the Lamp Cartridge

Tool needed: Phillips screwdriver

1.Turn the television off and unplug the AC cord.

2.Remove the front speaker grill by gently pulling on each side. The grill will snap out.

3.Using a phillips screwdriver, remove the three screws (one on the left and two on the right side) that hold the recessed plastic cover in place.

4.Remove the plastic cover and set aside with the screws.

5.After removing the cover, you will be able to see the lamp cartridge. With the screwdriver, loosen the three screws of the cartridge.

The three screws will not completely remove .

6.Gently grasp the metal handle and pull straight out (towards you).

7.Insert the new lamp cartridge securely into the TV. Do not touch the glass surface

of the cartridge.

8.	With the screwdriver, tighten the screws
	on the lamp cartridge.	6.handle
9.	Replace the plastic cover and screws.

2.

2.

3. 4.

10. Snap the speaker grill back into place	5. screws
by pushing it into place on each side

with the palm of your hand.

To order a replacement lamp cartridge, part number 915P020010, call (800) 553-7278.

96