Mitsubishi Electronics WD-62725, WD-52525 manual PC Viewing, PC Input

PC Viewing

PC Input

Figure 16

To display your PC screen on the TV, first, connect it to the TV’s back panel (see Chapter 2). You will then be able to select it through the Device Selection Menu. For the correct screen resolution (pixels), use the PC’s Control Panel settings.

Your Mitsubishi TV can display resolutions from standard VGA (640 x 480) through PC 720p (1280 x 720). See Appendix B, in this book for more screen resolutions. The instructions below are for most PC’s.

1.In the PC’s “Start” menu, select “Settings”.

2.Select “Control Panel”.

3.Select “Display”.

4.Choose the “Settings” tab.

5.Depending on your PC, either:

Use the Screen area slider or

Use the Screen Resolution slider to adjust the resolution.

You may need to restart the PC for this change to take effect.

��

����

Figure 16. PC resolution XGA selection

Hint: You may want to set the computer’s screen saver to a pattern, to display after several minutes, as a reminder that the TV is still powered on and time is being added to the lamp’s elapsed hours. Even if the screen appears dark, if the TV’s power is on, the lamp is in use.

��

��

58