Mitsubishi Electronics WD-57831 manual Audio/Video Menu, Analog and Digital Audio Settings

72Chapter 5. TV Menu Settings

Audio/Video Menu

Figure 12. Audio/Video Menu

A/V Memory Reset

A/V Memory Reset allows you to reset a specific input’s A/V settings to the original factory settings. Highlight the

box and press to select the input name. Next press

ENTER.

The audio settings of Balance, Listen to, and Language are general TV settings unaffected by A/V Memory Reset.

To reset all A/V settings at once, including the three general settings, perform an A/V Reset by pressing the front-panel buttons GUIDE and FORMAT simultaneously.

Settings (Audio and Video)

Each input or device has its own A/V memory. Press to select the input or device in the A/V Memory Reset box, then select Audio or Video to adjust individual settings. Press ENTER to close the menu and display the individual settings.

Use to cycle through the individual settings. Use to change the setting values. Press EXIT to return to

normal TV viewing. For descriptions of the individual A/V settings, see the following pages.

Video Mute

The default is On, which displays a blue background when no signal is being received on the INPUT, COMPO- NENT, or HDMI jacks.

Film Mode (480i signals only)

Auto is the default setting. With Auto selected, the TV automatically detects and applies film-decoding correc- tion for images that originated on 24-frame-per-second film cameras and were converted to 30-frame-per-second video for broadcast (3:2 pulldown conversion). Try the Off setting if the TV adds noticeable jagged edges to the images.

When the original video was filmed on 30-frame-per-sec- ond cameras, the Auto setting automatically applies video decoding, the same as used with the Off setting.

Film Mode is not effective for high-definition signals.

TV Speakers

This selection turns the TV’s internal speakers on or off. Select Off:

•When sending the sound through a separate sound system or surround sound A/V receiver.

•If your A/V receiver is under NetCommand control

Note: To prevent damage from a sudden increase in vol- ume, turn the TV volume down low before chang- ing this option to On.

Audio/Video Settings and the Remote Control

To adjust individual audio or video settings directly with the remote control:

1.Press AUDIO or VIDEO repeatedly to cycle through the available settings.

2.Press to adjust the setting. The setting display will disappear after five seconds of inactivity.

Audio Settings

Analog and Digital Audio Settings

Enter the audio adjustment mode using either the Audio/

Video menu or the AUDIO key. Use to change settings. Some adjustable settings display a slider and correspond- ing numeric value on screen. Values can be adjusted from 0 to 63, with 31 as the midpoint.

Note: The effects of the audio settings of Bass, Treble, Balance, and Surround affect only the sound heard through the TV speakers.

◊Bass

Enhances or reduces low-pitched sound.

◊Treble

Enhances or reduces high-pitched sound.

◊Balance

Adjusts the level of sound between the left and right TV speakers.

◊Surround

Creates simulated stereo and surround effects through the TV speakers. Your choices are:

•Off: No surround effects (default).

•Simulated Stereo: The TV creates a simu- lated stereo effect when watching a non-stereo program.

•Surround Sound: The TV creates a simulated surround effect when watching a stereo program.

◊Level Sound

When on, automatically equalizes the volume level when there are significant sound-level differences between program segments, such as between regular programming and commercials.