MODEL: WD-52527 / WD-52528 / WD-62527 / WD-62528

SERVICING THE LENTICULAR SCREEN AND FRESNEL LENS

Lenticular Screen and Fresnel Lens Installation

Note: Store the Lenticular Screen and Fresnel Lens in a cool dry place. High humidity may deform the Lenticular Screen and Fresnel Lens.

1.Apply double coated tape (Part #LENS-TAPE) along the top rear edge of the Lenticular Screen, as shown below. Refer to the table below for the tape length.

2.Sandwich the Fresnel Lens and Lenticular Screen together. The Lenticular Screen label must be towards the front and the Fresnel Lens label towards the rear. (Figure 4)

3.Apply pressure at the top edge to bond the screens together.

4.Reverse the Screen Removal procedure and insert the screens in the Screen Frame Assembly.

Figure 4: Installing the Fresnel Lens & Lenticular Screen

*X INCHES - refer to the Tape Length in the table below

MODEL

SCREEN SIZE

TAPE LENGTH

WD-52527

55 inch

46.3 inches

WD-52528

55 inch

"

WD-62527

65 inch

55.1 inches

WD-62528

65 inch

"

Page 24

Page 24
Image 24
Mitsubishi Electronics WD-62527, WD-62528, WD-52528 specifications Lenticular Screen and Fresnel Lens Installation