2. TV Menus | 21 |
Sound
Sound Audio
Settings in this menu are saved for the current input only with the exception of Balance,
which applies to all inputs. Press 
to make changes and then press MENU to return to the menu screen.
To make Audio adjustments while watching TV and without using the menu:
1.Press the AUDIO key.
2.Press 
to select an audio option.
3.Press 
to change the setting.
TV Speakers | On | Turns on the internal TV speakers. |
| Off | Turns off the internal TV speakers so you hear sound only from a connected A/V receiver. |
|
| Note: When you disconnect an A/V receiver, be sure to change the Sound setting |
|
| to TV to hear sound from the TV speakers. |
|
|
|
| Center | 840 Series. Makes the TV’s speaker array act as a center channel. See “Using the |
|
| TV Speakers as a Center Channel,” page 16. |
|
| Notes: |
|
| • When Center is active, the subwoofer output is muted even if set to On. |
|
| • To |
Center | [Center channel | 840 Series. Adjusts the volume level of the TV speaker array when used as a |
| level adjustment] | center channel. |
|
| Note: Set TV Speakers to Center to make this adjustment available. |
Bass | Controls volume of | ||
Subwoofer |
|
| |
[Subwoofer level | 840 Series. Adjusts the volume level of a connected subwoofer. | ||
| adjustment] | Note: Set Sound > Global > Subwoofer to On to make this adjustment available. | |
Treble |
| ||
Controls volume of | |||
Balance |
| ||
Controls audio balance between the right and left TV speakers | |||
|
|
| |
Sound Mode | Stereo | No special audio effects from the TV speakers | |
|
|
| |
| Surround | Modifies audio from the TV speakers. | |
|
| • For monaural | |
|
| • For stereo programs, creates a simulated surround sound effect. | |
|
| • The TV’s speaker array plays surround sound if available. | |
|
|
| |
| Music | 840 Series. Optimizes the TV’s speaker array for music listening. | |
|
|
| |
| Night | 840 Series. Focuses the TV’s speaker array to a single point to limit sound heard by | |
|
| others outside the room. Press ENTER to adjust the focal point (Night Angle). | |
Level Sound | On, Off | Reduces differences in sound volume between programming segments, such as the | |
|
| difference between regular broadcast programs and commercial segments. | |
Listen To |
|
| |
Stereo | The TV plays stereo broadcasts in stereo and mono broadcasts in mono. The word | ||
(applies only |
| Stereo is displayed when you tune to a channel broadcasting in stereo. | |
to analog | Mono | Reduces background noise. Use when receiving a weak stereo audio signal. All | |
channels from | |||
| audio is played as mono. | ||
the ANT input) |
| ||
|
| ||
SAP | Selects an additional monaural sound track not audible during normal TV viewing. | ||
| |||
| (Second Audio | The SAP signal might be related to the program (such as a sound track in a foreign | |
| Program) | language), or it might be unrelated (such as a weather report). If an SAP signal is | |
|
| broadcast, the letters SAP are displayed when you tune to the channel. | |
For assistance call 1(800)
