Mitsubishi Electronics WD-82CB1 manual Inputs Name, CD/Audio, MP3 Player, VCR, PC, AVR, Delete

2. TV Menus 27

Inputs

Inputs Name

INPUT and HDMI jacks:

Cable box, Cam(corder), CD, DVD (DVD, DVD2, Blu-ray), DVR, Game (Game, PS, Xbox, Wii), Media Box, PC, Satellite, AVR, On/Off (ANT only)

INPUT jacks only:

CD/Audio, MP3 Player, VCR

HDMI jacks only:

PC, AVR, Delete

•Lets you assign or change the names of inputs appearing in the Input Selection menu. Highlight an input and press ENTER multiple times to cycle through the name choices.

•Lets you turn the Ant input On/Off to display or hide it in the Input Selec- tion menu; highlight the input and press ENTER to switch between On and Off.

•840 Series. Lets you turn the Bluetooth input On/Off to display or hide it in the Input Selection menu; highlight the input and press ENTER to switch between On and Off.

•Lets you delete unused HDMI inputs from the Input Selection menu.

•A CEC-enabled tuner can be named either Cable Box or Satellite.

•A CEC-enabled DVD player can be named DVD, DVD2, or Blu-ray.

General Notes for the Inputs > Name Menu When you change an input name and then exit the Name menu:

•The name is changed

•The icon in the Input Selection menu is changed

•Audio and video settings are changed to the defaults for the new device type.

Notes for HDMI devices

•Disconnecting an HDMI device: When you dis- connect an HDMI device, the icon remains in the Input Selection menu until you remove it. Select Delete in the Inputs > Name menu to remove an unwanted icon for an HDMI input.

•HDMI Control and CEC-Enabled Devices: See “HDMI Control of CEC Devices” on page 33.

•In case of CEC conflicts: Turn off CEC signals in one of these ways:

-Turn off the TV’s HDMI Control signals to the device (Inputs > HDMI Control menu).

-Turn off each device’s internal CEC capability.

See “HDMI Control of CEC Devices” on page 33 for the TV’s HDMI Control or, to turn on/off a specific device’s response to CEC signals, see the device owner’s manual.

•If the New Device Found screen does not display as expected when you connect an HDMI device:

a.Power off the device.

b.Disconnect the HDMI cable.

c.Press MENU on the TV remote control to enter the TV main menu.

d.Go to Inputs > Name.

e.Highlight the HDMI input name and press ENTER to select Delete.

f.Press EXIT to clear the menus.

g.Connect the new device and the New Device Found screen will display.

For assistance call 1(800) 332-2119