302. TV Menus

Lock, continued

Using TV Locks

After you set the lock, you must use your pass code to:

View a locked program

View a locked channel

View the locked TV

Cancel the lock

Open the Lock menus

Tips for Using the Lock Menu

When entering the Lock menu, you will be prompted to enter a pass code.

To change the pass code, press 9 and LAST at the same time. Either enter a new pass code to open the Lock menu and make changes or press EXIT to close the menu.

If any of the locks are turned on and you exit the menus when prompted for a new code, the old code and all lock settings will be retained.

If all locks are turned off and you exit the menus when prompted for a new code, then the previous code will be erased.

Bypassing TV Locks

If you try to watch a blocked program or channel or the TV is locked by time, a notice will appear prompting you for a pass code. To use the TV, input your four-digit pass code and press ENTER.

To reactivate the locks after using a pass code, power the TV off and then on.

If a program is blocked, you can still use the TV without entering a pass code. Change to a channel airing an allowed program or change to another device.

If you forget your pass code, you can view the locked TV without entering your pass code. When prompted for the pass code, press the number 9 and LAST keys on the TV remote control at the same time. This process temporarily unlocks the TV.

IMPORTANT

When changing or deleting your pass code, you must use the remote control included with this TV. You cannot use a Mitsubishi remote control from another component or a “universal” remote.

For assistance call 1(800) 332-2119

Page 30
Image 30
Mitsubishi Electronics WD-82CB1, WD-73740, 840 SERIES manual Using TV Locks, Tips for Using the Lock Menu, Bypassing TV Locks