Mitsubishi Electronics WD570U, XD560U user manual Network Config menu, Set, Dhcp, Ssid

Menu operation (continued)

Network Config menu

Network Config

Projector Name		SET
Network Certification		On
Network Password		OK
IP Config		OK
Wireless Setting		OK
AMX Device Discovery		Off
Network Initialization		OK
Network Restart		OK
	Adjust	MENU	Exit
	Select

	IP Config
DHCP		On
IP Address	169	- 254 -			0	-	220
Subnet Mask	255	- 255	-		0	-	0
Default Gateway	169	- 254	-		0	-	1
MAC Address		xx-xx-xx-xx-xx-xx
DHCP Function		Off
Start IP Address	169	- 254	-		0	- 221
End IP Address	169	- 254	-	254 - 254
IP Config Setup		OK
Adjust		MENU Exit
Select

		Wireless Setting
SSID			SET
Channel			Auto
Encryption			Off
Wireless Setup			OK
	Adjust		MENU	Exit
	Select

ITEM	SETTING			FUNCTION
Projector Name	xxxxxxxx...			Displays Projector Name. Displays Projector Name in blank when
				Projector Name is not set.
	SET			Set Projector Name. Enter up to 15 character alphabets (capital/small),
				numeric characters, or marks.
Network Certification	On	/ Off		Select whether to enable the network certification	or not. Select On for
				normal use.
Network Password	OK			Set the password for PJLink certification.
IP Config	OK			Select this setting for IP Configuration. (See page	34.)
DHCP	On / Off			Use this setting when you obtain IP Config automatically by DHCP
				server.
IP Address	xxx-xxx-xxx-xxx			Displays IP Address.
Subnet Mask	xxx-xxx-xxx-xxx			Displays Subnet Mask.
Default Gateway	xxx-xxx-xxx-xxx			Displays Default Gateway.
MAC Address	xx-xx-xx-xx-xx-xx			Displays MAC Address.
DHCP Function	On / Off			Use this setting when the projector behaves as a DHCP server.
Start IP Address	xxx-xxx-xxx-xxx			Displays Start IP Address. However, Start IP Address is not set as
				factory default, and cannot be displayed.
End IP Address	xxx-xxx-xxx-xxx			Displays End IP Address. However, End IP Address is not set as
				factory default, and cannot be displayed.
IP Config Setup	OK			Set the IP configuration.
Wireless Setting	OK			Select this setting for wireless configuration.
SSID	xxxxxxxx...			Displays SSID.
	SET			Set SSID. Enter up to 32 characters (alphabets or numeric characters).
Channel	Auto / 1 / 2 / 3 / 4 / 5 /			Select the wireless channel.
	6 / 7 / 8 / 9 / 10 / 11
Encryption	SET		/ Off /	Select the wireless encrypted communication.
	WEP 128bit(ASCII) /
	WEP 64bit(ASCII) /
	WEP 128bit(HEX) /
	WEP 64bit(HEX) /
	WPA-PSK(ASCII) /
	WPA2-PSK(ASCII) /
	WPA-PSK(HEX) /
	WPA2-PSK(HEX)
Wireless Setup	OK			Set the wireless configuration.
AMX Device Discovery	Off	/ On		Use this setting when using an AMX controller.
Network Initialization	OK			Initializes network setting.
Network Restart	OK			Restarts network function.

EN-28