Mitsubishi Electronics WS-55908, WS-65908 manual Remote Control Functions Operation of PIP and POP

Part IV: Operation

Remote Control Functions: Operation of PIP and POP

1	MAIN
	PICTURE	Side-by-Side

		POP 1
	MAIN
		POP 2
2	PICTURE
		POP 3

Changing PIP/POP Inputs

Press PIP INPUT to cycle through available inputs. To see which inputs can and cannot be used together, see How Connections Affect the PIP and POP - Table 1, page 14.

Changing PIP/POP Channels

Press PIP CH to scroll up and down through memorized channels on Ant-A, and Ant-B.

Exchanging Program Images

Press ENTER/EXCH to exchange the main picture and the PIP/POP picture.

Moving PIP Image

Press ADJUST , , , or to move the PIP display anywhere on the main screen.

		POP 1	POP 2	POP 3
	MAIN
3		POP 4	POP 5	POP 6
	PICTURE
		POP 7	POP 8	POP 9

Ant-A 002 KCBS	PIP A 017
480i Standard
Stereo SAP
TV-PG DLSV
SQV1

4

Automatic POP Switching

When automatic POP switching is active, the TV will cycle through memorized channels or strobe pictures from other A/V compo- nents in the POP display. Press PAUSE to activate/pause automatic POP switching.

Selecting POP “Live” Image

Press ADJUST , , , or to select a different POP “live” image (automatic POP switching must be paused).

Freeze the PIP and Side-By-Side Picture

Press PAUSE to freeze the PIP and side-by- side images. Press Pause again to return to a “live” image.

Operation of PIP and POP

Ant-A 002 KCBS	PIP A 017
480i Standard
Stereo SAP
TV-PG DLSV
SQV1

5

PIP/POP Audio Signal

For PIP/POP audio connection illustration,

see Back Panel Functions - 3 , page 13. Volume for the PIP AUDIO OUTPUT is con- trolled by the ampli er or wirel ess head- phones.

55