Mitsubishi Electronics WS-55908, WS-65908 Channel Menu Antenna, Channel, Memory, Name, and SQV

Part III: Setup

Channel Menu: Antenna, Channel, Memory, Name, and SQV™

SQV (Super Quick View™)

Using The Menu Screen

(Figure 1)

Figure 1. Channel menu

SQV (Super Quick View™) allows you to put together a list of your favorite channels from Ant-A and Ant-B. You can store up to 6 channels in each of the 9 different memory banks. Once you have added a channel to the SQV memory, “SQV” will appear under the channel number on the TV screen.

Antenna

(Figure 1)

Select Ant-A, or Ant-B. For each antenna, you can add or delete channels in memory, name channels, and add channels to the SQV (Super Quick View™) list.

Channel

(Figure 1)

Select the channel you want to add or delete from memory, name, or add to the SQV Super Quick View™ list.

Memory

(Figure 1)

After all available channels have been mem- orized with Memorize Channels, page 33, weaker channels viewed with Ant-A or Ant-B can be added and unwanted channels can be deleted.

Use the CHANNEL button on the remote control to view memorized channels.

Name

(Figure 1)

Channels shown on Ant-A or Ant-B can be given names (up to four characters). After you enter a name, it will appear on the TV screen, next to the channel number.

SQV (Super Quick View™)

Using The Remote Control

Viewing and changing SQV banks using the remote control:

1Press the SQV button.

2To change memory banks, press a number button within 5 seconds of pressing the SQV button.

3Press the SQV button repeatedly to cycle through the channels available in that bank.

Adding SQV channels using the remote con- trol:

1Use the CHANNEL or number buttons to select the channel you want to add to

the current SQV memory bank.

2Press and hold the SQV button for

about 3 seconds. When “SQV” and the memory bank number appear under the channel number, the channel has suc- cessfully been added.

Removing SQV channels using the remote control:

1Press the SQV button repeatedly until

you see the desired channel.

2While the channel number and SQV indi-

cator are still displayed on the screen, press the CANCEL button. If the CANCEL button is not pressed before the SQV indicator disappears, the chan- nel will not be removed.

3When the SQV indicator disappears, the channel has successfully been removed.

Antenna, Channel, Memory, Name, and SQV™

35