Password function
This projector is equipped with the password function that is designed for prevention of wrong operation by children and restriction on operation by other than specified users.
MENU ACCESS ............All the buttons except for the POWER
button on the projector are disabled. (The buttons on the remote control are enabled.) You can use this mode as a measure of prevention of wrong operation by children and restriction on operation by other than specified users.
To enable the password function:
1.Display the FEATURE menu.
2.Press the S or T button to select PASSWORD FUNC- TION.
3.Press the ENTER button.
•The screen for setting the password function will appear.
opt.
XGA60
MENU ACCESS
LOCK | OK |
|
|
|
|
|
|
UNLOCK | OK | ||
|
|
|
|
•When the password has already been set, the mode won’t be changed. In such cases, press the ENTER button to cancel the password function and try again.
4.Press the ENTER button.
•The screen for entering a password will appear.
PASSWORD
CONFIRM
O K |
| CANCEL |
|
|
|
5.Press the S or T button to select a number from 0 to 9.
6.Press the X button.
•You can set the next digit.
7.Repeat steps 5 and 6 to set a
8.Enter the password again for confirmation using the same steps.
9.Select OK, and press the ENTER button.
•If the entered passwords don’t match, an error mes- sage will appear.
•To cancel the procedure, select CANCEL, and press the ENTER button.
•You can cancel the procedure by pressing the MENU button alternatively.
To cancel the password function: | ENGLISH | ||
1. | Display the FEATURE menu. | ||
| |||
2. | Press the S or T button to select PASSWORD FUNC- |
| |
| TION. |
| |
3. | Press the ENTER button. |
| |
| • The screen for canceling the password function will |
| |
appear.
opt.
XGA60
MENU ACCESS
LOCK | OK |
|
|
|
|
|
|
UNLOCK | OK | ||
|
|
|
|
4.Press the ENTER button.
• The screen for entering the password will appear.
PASSWORD
O K |
| CANCEL |
|
|
|
5.Press the S or T button to select a number from 0. to 9.
6.Press the X button.
•You can set the next digit.
7.Repeat steps 5 and 6 to enter the
8.Press the X button, select OK, and press the ENTER but- ton.
•If you enter a wrong password, an error message will appear.
•To cancel the procedure, press the X button, select CANCEL, and press the ENTER button.
•You can cancel the procedure by pressing the MENU button alternatively.
Important:
•If you forget your password, keep pressing the MENU and ENTER buttons on the control panel at the some time about three seconds to cancel the password function.
