Mitsubishi Electronics XD250U-G, XD280U-G user manual Installation menu

Menu operation (continued)
2. INSTALLATION menu
Menu option		Setting		Feature description		opt.
	OFF/BEIGE		/ LIGHT	Selects a desired setting based on the color of the screen or wall
WALL SCREEN	BLUE	/ LIGHT GREEN		on which images are projected. (See page 16.) When selecting a	INSTALLATION
	/ PINK		/BLACK	setting other than BLACK BOARD/WHITE BOARD, you can fine-
						WALL SCREEN	BEIGE
	BOARD/WHITE BOARD			tune the color tone to the desired level on the 1 to 5 scale.		LAMP MODE	STANDARD
	STANDARD			Select this setting when you want to view images in a well-lit		STANDBY MODE	STANDARD
				room.
						AUDIO INPUT	AUTO
				Select this setting when you want to view images at a moderate		AUTO KEYSTONE	OFF
LAMP MODE				light intensity. The operating sound is consequently reduced, and		IMAGE	OFF
				the lamp lifetime becomes longer.		REVERSE
	LOW					ADVANCED MENU	OK
				• When this mode is switched, projected images may flicker.
				• If this mode is frequently switched, the lamp may be deterio-		opt.
				rated.
	STANDARD			LAN can be activated in STANDARD MODE.	INSTALLATION
STANDBY MODE	LOW			Power consumption can be lowered when selecting LOW. How-	ADVANCED MENU
				ever, LAN and MONITOR OUT cannot be activated.		AUTO POWER
							OFF
				If AUTO is selected, selects AUDIO 1 when the input source is		ON	OFF
						AUTO POWER
				COMPUTER 1, selects AUDIO 2 when the input source is COM-		OFF
	AUTO					IMAGE CAPTURE	GO
				PUTER 2, selects AUDIO 3 when the input source is VIDEO/S-		SPLASH
					ON		ON
				VIDEO, selects HDMI when the input source is HDMI.		SCREEN
AUDIO INPUT
						BACK COLOR	BLUE
	AUDIO 1/AUDIO 2/AUDIO 3			Select the audio input.		AV MUTE MODE	BLACK
	MIX			Selects MIX signal of AUDIO 1 and AUDIO 2. You can change the		LAMP TIME	OK
						RESET
				balance of AUDIO 1/AUDIO 2 using MIX .
					INSTALLATION
AUTO KEYSTONE	ON/OFF			Select Auto Keystone function.
	OFF			Select this setting when you want to view images from the front	ADVANCED menu
				with the projector set on the floor.
	MIRROR			Select this setting when you want to view images from behind the
				screen with the projector set on the floor.
IMAGE REVERSE
				Select this setting when you want to view images from behind the
	INVERT
				screen with the projector set at the ceiling.
	MIRROR INVERT			Select this setting when you want to view images from the front
				with the projector set at the ceiling.

ADVANCED MENU	OK
		When this mode is set to ON, the lamp is automatically lit when
		the power cord is plugged in the wall outlet. Select ON when you
AUTO POWER ON	ON/OFF	set the projector at the ceiling.

•When the lamp is off, the projector is in standby. Use the remote control to turn on the lamp.

AUTO POWER OFF	OFF/5-60 min	Selects a desired timer setting until the projector enters the
		standby mode when there is no signal input from the source.
IMAGE CAPTURE	GO	Use to capture the screen for the splash screen. (See page 30.)
SPLASH SCREEN	ON/OFF	Select ON to display the splash screen when the projector is pow-
		ered on.
BACK COLOR	BLUE/BLACK/IMAGE	Selects the background color that is displayed when there is no
		signal input from the source.
		Use to choose the background, either BLACK, or IMAGE, which
AV MUTE MODE	BLACK/IMAGE	will be displayed when the AV MUTE button is pressed. When
		IMAGE is chosen, the splash screen will be displayed.
LAMP TIME RESET	OK	Resets LAMP TIME.

•By default, the LAMP MODE is set to STANDARD. The LAMP MODE is set to either STANDARD or LOW depending on the setting last selected, and you cannot switch the LAMP MODE in about one minute after the lamp is on.

•In AUDIO INPUT, HDMI audio is selected when the Input Source is HDMI input. The audio of AUDIO 1, AUDIO 2, AUDIO 3, and MIX cannot be selected.

ENGLISH

EN-21