Mitsubishi Electronics XD250U-G SINGAL menu, SIGNAL USER menu, NETWORK menu, Network Ip Config

Menu operation (continued)

4. SINGAL menu

	Menu option		Setting	Feature description
HORIZ. POSITION		0-999		Select this setting to adjust the horizontal position of projected images.
VERT. POSITION		0-999		Select this setting to adjust the vertical position of projected images.
FINE SYNC.		0-31		Select this setting to eliminate flickering or blurs, if they appear, when
				you are viewing projected images.
TRACKING		0-2800		Select this setting to eliminate vertical wide stripes, if they appear, when
				you are viewing projected images.
		AUTO		Automatically sets the appropriate setting.
		RGB		Select this setting when you connect the projector to high definition
				video equipment having R, G, and B output terminals.
COMPUTER INPUT
				Select this setting when you connect the projector to a DVD player or
		YCBCR/YPBPR		other device having Y, CB, and CR (or Y, PB, and PR) component video
				output terminals.
OVER SCAN		100%-90%		Use this setting to adjust the display area of projected images.
HOLD		OFF / ON		Use this setting to adjust projected images when flagging occurs in the
				upper area of the screen.
USER		OK
	CLAMP POSITION	1-255		Use this setting to correct solid white or solid black that appears in pro-
				jected images.
	CLAMP WIDTH	1-63		Use this setting to correct solid black that appears in projected images.
	VERT.SYNC	AUTO / OFF		Use this setting to adjust projected images when the motion is not
				smooth. Select AUTO for most cases.
	LPF	ON / OFF		Select this setting to enable or disable LPF.
	SHUTTER(U)	0-20		Use this setting to adjust projected images when noise appears in the
				top part of the image.
	SHUTTER(L)	0-20		Use this setting to adjust projected images when noise appears in the
				bottom part of the image.
	SHUTTER(LS)	0-20		Use this setting to adjust projected images when noise appears in the
				left half of the image.
	SHUTTER(RS)	0-20		Use this setting to adjust projected images when noise appears in the
				right half of the image.

opt.

SIGNAL

HORIZ. POSITION	0
VERT. POSITION	0
FINE SYNC.	0
TRACKING	0
COMPUTER	RGB
RRGGBB INPUT
OVER SCAN	100%
HOLD	OFF
USER	OK

opt.

SIGNAL

USER

		CLAMP	1
		POSITION
		CLAMP WIDTH	1
?	VERT. SYNC.		AUTO
		LPF	OFF
		SHUTTER(U)	0
		SHUTTER(L)	0
		SHUTTER(LS)	0
		SHUTTER(RS)	0

SIGNAL USER menu

ENGLISH

•Horizontal strips may appear in the enlarged projected image, though these conditions are not a malfunction.

•When you change the value of the horizontal or vertical position drastically, noise may appear.

•The adjustable range of the vertical position varies depending on the type of the input signal. The image may be stationary even when the value is changed. These conditions are not a malfunction.

•SHUTTER does not work correctly during keystone adjustment.

•When you increase the value of OVER SCAN, noise may appear on the screen.

Important:

•You can set the IMAGE, SIGNAL, and SIGNAL-USER menus only when the signal is input.

5. NETWORK menu

Menu option	Setting	Feature description
	*****...	Displays PROJECTOR NAME. Displays PROJECTOR NAME in
		blank when PROJECTOR NAME is not set.
PROJECTOR NAME
	SET	Set PROJECTOR NAME. Enter up to 15 characters (alphabets or
		numeric characters).
NETWORK PASSWORD	OK	Set the password for Web control or PJLink certification.
IP CONFIG	OK	Select this setting for IP Configuration.
DHCP	ON / OFF	Use this setting when you obtain IP CONFIG automatically by
		DHCP server.

opt.
NETWORK
PROJECTOR	SET
NAME
NETWORK	OK
PASSWORD
IP CONFIG	OK
PJLink	ON
CERTIFICATION
NETWORK RESET	OK

Displays IP ADDRESS. However, IP ADDRESS is not set as factory	opt.
***,***,***,***
default, and cannot be displayed.

	IP ADDRESS				NETWORK
			Set IP ADDRESS. When DHCP is set to ON, you cannot change
		SET			IP CONFIG
			this setting.
					DHCP	ON
		***,***,***,***	Displays SUBNET MASK. However, SUBNET MASK is not set as
					IP ADDRESS	192.168.0.10
			factory default, and cannot be displayed.
	SUBNET MASK
					SUBNET MASK	255.255.255.0
			Set SUBNET MASK. When DHCP is set to ON, you cannot change
		SET			DEFAULT	10.132.1.1
			this setting.		GATEWAY
					MAC ADDRESS	xx-xx-xx-xx-xx-xx
		***,***,***,***	Displays DEFAULT GATEWAY. However, DEFAULT GATEWAY is
				NETWORK IP CONFIG
			not set as factory default, and cannot be displayed.
	DEFAULT GATEWAY
		SET	Set DEFAULT GATEWAY. When DHCP is set to ON, you cannot	menu
			change this setting.
	MAC ADDRESS	xx-xx-xx-xx-xx-xx	Displays MAC ADDRESS.
PJLink CERTIFICATION		ON / OFF	Use this setting for PJLink Certification.
NETWORK RESET		OK	Resets the Network Setting.

EN-23