EN-10

Preparation/SetUp (continued)

Setting the display language of ProjectorView (language)

Enter “1” and press the Enter key.

Enter “0” for English or “1” for Japanese.

Setting the LAN control (LAN-Controlled Mode)

Enter “3” and press the Enter key.

To enable the e-mail notification function of ProjectorView, enter “1” and press the Enter key. (Default is OFF (0).) (See pages 12 - 15 for ProjectorView function.)

Page 10

Image 10

Mitsubishi Electronics XD3200U user manual Setting the display language of ProjectorView language, EN-10

Contents

LAN Control Utility Contents Major functions Preparation/SetUpPreparation before using the network function System requirements Connection InstallationPreparation/SetUp EN-3 EN-4 Setting the IP address of the projector EN-5 When using a Dhcp server EN-6 When not using a Dhcp server EN-7 Telnet setting EN-8 Setting the password Password Setup EN-9 Setting the LAN control LAN-Controlled Mode Setting the display language of ProjectorView languageEN-10 Save and exit Setting the PJLink certification PJLink certification ModeEN-11 ProjectorView Using the ProjectorViewHow to start up EN-12 ProjectorView main screen ProjectorViewEN-13 Mail notification function ProjectorView Virtual Remote controllerEN-14 ProjectorView Initial setting EN-15 Support for the PJLink function EN-16 Terms and definitions Support for the PJLink functionEN-17

Mitsubishi Electronics XD3200U Setting the display language of ProjectorView language, EN-10

Models: XD3200U

Preparation/SetUp (continued)

Setting the display language of ProjectorView (language)

Setting the LAN control (LAN-Controlled Mode)

EN-10