Mitsubishi Electronics XD3200U user manual EN-4, Preparation/SetUp continued

Models: XD3200U

1 17

Page 4

Preparation/SetUp (continued)

Select a folder to install the program, and click Next.

Click Next.

Installation starts.

•The progress of the installation process is displayed as shown on the right.

When the installation process is completed, click Close.

How to remove Projector-Control Device Installer

Select [Start] - [Control Panel] - [Add or Remove Programs] - [Projector-Control Device Installer] and click [Remove] (in the case of Windows® XP).

Image 4

Contents

Contents Preparation before using the network functionInstallation Setting the IP address of the projectorPreparation/SetUp Preparation before using the network functionMajor functions System requirementsInstallation Preparation/SetUp continuedConnection EN-3EN-4 Preparation/SetUp continuedEN-5 Setting the IP address of the projectorPreparation/SetUp continued When using a DHCP server EN-6Preparation/SetUp continued Select Obtain an IP address automatically and clickEN-7 When not using a DHCP serverPreparation/SetUp continued EN-8 Telnet settingPreparation/SetUp continued Setting the password Password Setup EN-9Preparation/SetUp continued Input the new password example “proj2000” againSetting the display language of ProjectorView language Setting the LAN control LAN-Controlled ModeEN-10 Preparation/SetUp continuedSetting the PJLink certification PJLink certification Mode Save and exitEN-11 Preparation/SetUp continuedUsing the ProjectorView How to start upProjectorView EN-12ProjectorView main screen ProjectorView continuedEN-13 E-mail notification function ProjectorView continued VIRTUAL REMOTE controllerEN-14 ProjectorView continued Initial setting EN-15Support for the PJLink function EN-16Support for the PJLink function continued Notes on Instant Shut DownTerms and definitions EN-17