Mitsubishi Electronics XD490U Available settings in the menus, EN-23, IMAGE menu, English

Available settings in the menus

Set the following items on their relevant menus.

1. IMAGE menu 2. INSTALLATION menu 3. FEATURE menu 4. SIGNAL menu

opt.	opt.	opt.	opt.
XGA60	XGA60	XGA60	XGA60

IMAGE		INSTALLATION		FEATURE		SIGNAL
COLOR	AUTO	WALL SCREEN	BEIGE	ASPECT	AUTO	HORIZ. POSITION	0
ENHANCER
CONTRAST	0	VIRTUAL	OFF	PASSWORD	DISPLAY INPUT	VERT.POSITION	0
		LENS SHIFT		FUNCTION
BRIGHTNESS	0	LAMP MODE	STANDARD	MENU POSITION	1.	FINE SYNC.	0

COLOR TEMP.	STANDARD	AUTO POWER	OFF	CINEMA MODE	AUTO	TRACKING	0
		ON

COLOR	0	AUTO POWER	OFF	?	VIDEO SIGNAL	AUTO		COMPUTER	RGB
		OFF					R G B	INPUT
							R G B

TINT

0

ON

SPLASH

ON

SET UP

AUTO

HOLD

OFF

SCREEN

SHARPNESS

0

BACK COLOR

BLUE

SCART INPUT

OFF

USER

OK

IMAGE

OFF

LANGUAGE

English

REVERSE

A Ë

1. IMAGE menu

RESET ALL

OK

ITEM

SETTING

FUNCTION

COLOR ENHANCER

AUTO

Select to optimize the settings automatically depending on the input signal.

(Select this option for normal use.)

PRESENTATION

Select to make the displayed image look bright and crisp.

STANDARD

Select to make the displayed image look natural.

THEATER

This option, suitable for viewing movies, makes the displayed image look soft

and smooth.

sRGB

Select to give priority to the color reproducibility.

• When COLOR ENHANCER is sRGB, COLOR TEMP., COLOR and TINT can't

be adjusted.

USER

Select to set the gamma curve and BrilliantColorTM as desired. (See page 26.)

CONTRAST

±30

Use to adjust the contrast of the projected image. (See page 25.)

BRIGHTNESS

±30

Use to adjust the brightness of the projected image. (See page 25.)

COLOR TEMP.

4 options

Use to adjust the color temperature. (See page 26.)

COLOR

±10

Use to adjust the color thickness of the projected image. (See page 25.)

TINT

±10

Use to adjust the color tint of the projected image. (See page 25.)

±5

• When the TV50 (PAL, SECAM) signal is input, TINT can't be adjusted.

SHARPNESS

Use to adjust the sharpness of the projected image. (See page 25.)

2. INSTALLATION menu

ITEM

SETTING

FUNCTION

WALL SCREEN

OFF / BEIGE

Select any option depending on the color of the wall on which images are

LIGHT BLUE

/

projected. When selecting any option other than BLACK BOARD, you can

LIGHT GREEN

/

make fine adjustment of color tone (1 to 5). (See page 11.)

PINK

/ BLACK BOARD

VIRTUAL LENS SHIFT

ON / OFF

Use to adjust the screen size and position.(See page 12.)

LAMP MODE

STANDARD

Select this option when you want to view images in a well-lit room.

LOW

Select to moderate the intensity of the lamp. The operating sound is reduced

and the lamp lifetime becomes longer.

•When the lamp mode is switched, the projected image may flicker. This is not a product malfunction.

•Frequent switching of the lamp mode may damage the lamp.

AUTO POWER ON	ON / OFF	When ON is chosen, the lamp is automatically lit when the power cord is
		plugged in the wall outlet. Choose ON when using the projector mounted on
		the ceiling.
		• The projector is in the stand-by mode when the lamp is off. Use the remote
		control to turn on the lamp.
AUTO POWER OFF	OFF / 5 - 60min	Use to set the time elapsed before the projector enters the stand-by mode
		when there is no signal input from the source.
SPLASH SCREEN	ON / OFF	Choose ON to display the splash screen when the power is turned on.
BACK COLOR	BLUE / BLACK	Use to change the color of the screen that appears when no signal is supplied.
IMAGE REVERSE	OFF	Select when viewing images from the front with the projector installed on the
		floor.
	MIRROR	Select when viewing images projected from the behind of the screen with the
		projector installed on the floor.
	INVERT	Select when viewing images projected from the behind of the screen with the
		projector installed on the ceiling.
	MIRROR INVERT	Select when viewing images from the front with the projector installed on the
		ceiling.

•LAMP MODE can’t switch for 1 minute after the power ON.

•WALL SCREEN is unavailable when COLOR ENHANCER is set to sRGB.

ENGLISH

EN-23