Mitsubishi Electronics XD500U-ST user manual Feature menu

Menu operation (continued)

3. FEATURE menu

Menu option		Setting	Feature description
	AUTO		Automatically sets the aspect ratio in relative to the input signal. Use
			this setting for most cases.
ASPECT			Selects a desired screen position for anamorphically squeezed or hor-
	16:9		izontally compressed images stored on DVD disks. You can select
			from CENTER, UPPER, and LOWER by pressing the ENTER button.
	FULL		Select this setting when you want to project images in the full screen.
PASSWORD FUCNTION			Use this setting to activate or deactivate the password lock.
MENU POSITION	2 options		Use this setting to change the position of the menu on the screen.
CINEMA MODE	AUTO/OFF		Select Auto to automatically activate the film mode when the input
			video signal is a video signal from a film.
			Select Auto to automatically set the appropriate video format in rela-
VIDEO SIGNAL	8 options		tive to the input signal. If projected images aren't displayed correctly,
			select a desired video format manually.
	OFF/AUTO/1280 x 768/		Select the appropriate format when the input signal is a WXGA video
WXGA	1280 x 768RB/
			signal.
	1360 x 768/ 1366 x 768
	AUTO		Select this setting to automatically change the SETUP mode.
	OFF		Select this setting to increase the density of black. Use this setting
			when images are dark.
SETUP
			Select this setting to lower the density of black.
	3.75%/7.5%		• When 7.5% is set, the brightness is decreased by the setup can-
			cel function for the U.S.
			Select ON when you connect the projector to a device equipped with a
			SCART terminal that can output RGB signals. The SCART terminal is
SCART INPUT	ON/OFF		used mainly in Europe. Select OFF for most cases.
			This mode can be set only when the input signal is from the COM-
			PUTER/COMPONENT VIDEO IN-1 terminal.
LANGUAGE	10 languages		Selects a desired language for the menu.
RESET ALL	OK		Resets all menu settings except for IMAGE CAPTURE, PASSWORD
			FUNCTION, and LANGUAGE to the default.

opt.

FEATURE

ASPECTAUTO

PASSWORD	DISPLAY INPUT
FUNCTION

	MENU POSITION	1.
	CINEMA MODE	AUTO
?	VIDEO SIGNAL	AUTO
WXGA	WXGA	OFF
	SETUP	AUTO
	SCART INPUT	OFF
A è	LANGUAGE	English
	RESET ALL	OK

ENGLISH

•You can select CINEMA MODE only when the input signal is a TV60, TV50, 480i, or 576i video signal.

•When SCART INPUT is set to ON, nothing is output to the external monitor. No computer signals are projected, either.

•Use a SCART-Mini D-SUB 15-pin cable (optional) when you connect the projector with an AV device equipped with the SCART terminal. Note that you cannot use some AV devices equipped with the SCART terminal to connect with this projector.

EN-19