Mitsubishi Electronics XD500U-ST Overview, Control panel, Terminal board, Kensington Lock

Overview

13 2 1 3 5

4 9 12

1FOCUS ring

2Control panel

3Air inlet grille

4Remote control sensor (Front)

5Air inlet grille

6Air outlet grille

7Terminal board

8Speaker

9Adjustment feet (front)

10Adjustment feet (rear)

11Lock bar

12Foot Adjustment button (Front)

13Lamp cover

Caution:

Do not replace the lamp immediately after using the pro- jector because the lamp would be extremely hot and it may cause burns.

10 7

Control panel

3

9

5

4

Terminal board

8 11 10 6

2

8

6

1

7

1Power button

2AUTO POSITION / S button

3COMPUTER / W button

4MENU button

5STATUS indicator

6POWER indicator

7KEYSTONE/ENTER button

8VIDEO/ X button

9T button

Important:

•While the menu or the screen for the keystone adjust- ment or password entry is being displayed, the COM-

PUTER, VIDEO, and AUTO POSITION buttons function as the W, X, and S buttons respectively.

•While the menu is on the screen, the KEYSTONE but- ton functions as the ENTER button.

3 2 8 9 6 7 11 5 4 13

1 12 10

EN-6

1Power jack

2COMPUTER-IN terminal (1, 2) (Mini D-SUB 15-pin)

3MONITOR OUT terminal (Mini D-SUB 15-pin)

4Remote control sensor (Rear)

5USB (COMPUTER) terminal

6AUDIO-IN terminal (Mini jack)

7AUDIO-OUT terminal (Mini jack)

8S-VIDEO terminal

9VIDEO terminal

10Lock bar

11SERIAL (RS-232C) terminal (D-SUB 9-pin)

12AUDIO-L/R terminals

13Kensington Lock

Kensington Lock

This projector has a Kensington Security Standard con- nector for use with Kensington MicroSaver Security Sys- tem.

Refer to the information that came with the Kensington System for instructions on how to use it to secure the pro- jector. Please contact Kensington Technology Group below.

Kensington Technology Group

2855 Campus Drive

San Mateo, CA 94403, U.S.A.

Phone: +1- (650)572-2700 Fax: +1- (650)572-9675