Mitsubishi Electronics XD80 user manual Keystone Manual Adjustment, Adjustment of the Volume

General Operation

Keystone Manual Adjustment

Use this to adjust for trapezoidal (keystone) distortion of the pro- jected image.The projector has both an automatic and a manual key- stone adjustment function.The manual adjustment will be described here.

Adjustment Method

(1)Press the (￿￿) buttons of the projector, or the (￿￿) KSTN but- tons of the remote control and set the left and right sides so that they are parallel.

The keystone adjustment display appears when one of the buttons is pressed.

Press the ￿ button. Press the ￿ button.

The dotted lines indicate the proper condition

(1)

SOURCE AUTO

(Projector button)

STANDBY			MENU
RGB		ENTER
VIDEO	CANCEL		QUICK
			Q
(2)
FREEZE	MUTE	LAMP MODE	AUTO
1	2	3	4
			ASPECT
VOL	KSTN	ZOOM	TIMER

(1)

(2)To exit the display immediately, press the CANCEL button of the remote control.

The display will close when there has not been an operation in about 10 seconds.

Note:

*Screen examples have been drawn in an exaggerated style for the purpose of description.

*Please note that depending on the projected picture and the projection conditions, it may not be possible to eliminate keystone distortion completely.

*When the Auto Keystone function is OFF, the keystone adjustment settings will be maintained even when the power has been turned off.

*See “Adjustment of the Projection Screen” on Page E-22 for information about the Auto Keystone function. See “Auto Keystone” on Page E-46 for information about turning Auto Keystone ON and OFF.

Also see “Keystone” on Page E-46 for information about making manual adjustments using the on-screen menu.

Adjustment of the Volume

This function adjusts the volume of the built-in speaker.

STANDBYMENU

(1)Press the ￿ or ￿ VOL button to adjust the volume.

The volume adjustment display appears when one of the buttons is pressed.

The ￿ button increases the volume and the ￿ button decreases the volume.

(2)Press the CANCEL button to immediately close the display. The display will close when there has not been an operation in about 10 seconds.

Note:

*Adjustment of the volume will not produce any sound unless an image is being projected.

RGB		ENTER
VIDEO	CANCEL		QUICK
			Q
			(2)
FREEZE	MUTE	LAMP MODE	AUTO
1	2	3	4
			ASPECT
VOL	KSTN	ZOOM	TIMER

(1)

E-27